AXIS 1650 User’s Manual | Print Server Management and Configuration | 51 |
|
|
|
Print Server Management Using FTP
Having assigned an IP address to your AXIS 1650, as described in 2. Set the IP Address, on page 13, you can change the AXIS 1650 parameter settings using the File Transport Protocol (FTP).
Editing the config file
Follow the instructions below to edit the config file using FTP:
1.Log in to the AXIS 1650 by typing:
ftp <host name> or ftp <IP address> in a Command prompt.
2.Enter the user id, the default entry is root (if the default password has been changed then it must also be entered).
3.Download the config file to your host by typing: get config
4.Edit the file using your preferred text editor.
5.Save the config file to the AXIS 1650 by typing: put config CONFIG
It is important that the destination file is specified in capital letters. Otherwise the edits are temporary and will be lost once the AXIS 1650 has been rebooted.