SanDisk SSD 5000 manual Interface

SSD SATA 5000 2.5"	Product Manual
	Rev 0.7

7.Interface

7.1Supported Standards

The SSD complies with the following standards:

ATA/ATAPI-7: ANSI INCITS 397-2005, AT Attachment with Packet Interface-7.

Serial ATA Revision 2.5 Specification (Ratification Date: October 27, 2005).

7.2Interface Connector Characteristics

Table 15: SanDisk SSD SATA 5000 2.5” Connector Characteristics

Parameter	Specifications
Drive Connector	FCI, 10039651-001LF
Mating/Unmating force	The force to mate a receptacle connector
	and compatible plug connector should not
	exceed 45N (4.6kgf)
	The unmating force should not be less than
	10N (1.0kgf)
Durability	5,000 cycles

7.3Hotplug Support

The SSD supports hotplug operation per SATA 2.5 specification.

7.4SATA Bridge Support

The SSD supports Marvell’s Serial ATA bridge (P/N: 88SA8040).

7.5Interface Connector Drawing

Figure 3: Interface Connector View

© 2008 SanDisk® Corporation 14 July 2008, Document No. 80-11-01488