SSD SATA 5000 2.5" | Product Manual |
| Rev 0.7 |
2.General Product Specifications
2.1Interface
The SSD interface complies with the following standards: SATA 1.0a Gen1i (1.5Gb/s)
SATA 2.5
The SSD supports Serial ATA 1.5Gbps (150MB/sec) interface rate.
2.2Capacity
This datasheet refer to the 8, 16, 32, 64GB version.
Table 1: SanDisk SSD SATA 5000 2.5” Capacity
Unformatted | Total Number of | Number of | Number of | Number of |
Capacity | Logical | Logical | Logical | |
| Sectors in LBA Mode | Cylinders | Heads | Sectors per |
|
|
|
| Track |
8GB | 15,649,200 | 15,311 | 16 | 63 |
16GB | 31,277,232 | 16,383 | 16 | 63 |
|
|
|
|
|
32GB | 62,533,296 | 16,383 | 16 | 63 |
|
|
|
|
|
64GB | 125,045,424 | 16,383 | 16 | 63 |
2.3Performance
Table 2: SanDisk SSD SATA 5000 2.5” Performance
Parameter | Specifications |
|
|
Host transfer rate: |
|
|
|
Ultra DMA mode1 | 150MB/s |
Internal transfer rate (maximum): |
|
Sequential Read1,2 | 68MB/s |
Sequential Write1,2,6 | 60MB/s |
Random Read1,3 | 68MB/s |
Random Write1,3 | 6MB/s |
IOPS: |
|
|
|
Random Read (4KB)1,3 | 4800 |
Random Write (4KB)1,3 | 10 |
Average access time1,2,4 | 0.11 msec |
Typical | 1.0 sec |
1.Tested in Ultra DMA 150MB/s
2.H2BENCH.c,v 3.6 2002/10/31, Windows
3.IOMETER 2003.12.16
4.SSD does not have seek time or latency time
5.Assume proper shutdown process.
6.Write Buffer of 32KB is used to optimize small transfer size transactions.
© 2008 SanDisk® Corporation | 6 | July 2008, Document No. |