SanDisk SSD 5000 Supported ATA Commands, Command Name, Command Code, Set Features, Sub-commands

SSD SATA 5000 2.5"	Product Manual
	Rev 0.7

8.Supported ATA Commands

Command Name

ATA standard commands

Command Code

Download Microcode		92h
Execute Device Diagnostic		90h
Flush Cache		E7h
Flush Cache Ext		EAh
Identify Device		ECh
Device Configuration Restore		B1h/C0h
Device Configuration Freeze lock		B1h/C1h
Device Configuration Identify		B1h/C2h
Device Configuration Set		B1h/C3h
Identify Device DMA		EEh
Initialize Device Parameters		91h
NOP		00h
Read Buffer		E4h
Read DMA		C8h or C9h
Read DMA Extended		25h
Read Multiple		C4h
Read Multiple Extended		29h
Read Sectors		20h or 21h
Read Sectors Extended		24h
Read Verify Sectors		40h or 41h
Read Verify Sectors Extended		42h
Read Native Max Address		F8h
Read Native Max Address Ext		27h
Set Max Address		F9h
Set Max Address Extended		37h
Recalibrate		10h
Seek		70h
Read Log Ext		2Fh
Write Log Ext		3Fh
Set Features		EFh
Set Features	Enable write cache (default: On)	02h
sub-commands:
	Set transfer mode	03h
	Enable Advanced Power Management	05h
	Enable SATA Feature - software Setting Preservation	10h
	Enable automatic acoustic management	42h
	Disable look-ahead	55h
	Disable reverting to power-on defaults	66h

© 2008 SanDisk® Corporation 16 July 2008, Document No. 80-11-01488