360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com
7 MANUFACTURER’S EQUIPMENT FILE CHECKLIST (PER FCC RULES §2.1075)
This checklist shall be used by the manufacturer to verify the correct filing per FCC 2.1075 Retention of records for products produced and marketed.
PRODUCT MODEL(s): | Records Verified By: |
SanDisk SSD SATA 5000 2.5”
A record of the original design drawings and specifications.
A record of all changes that have been made that would affect continued compliance with the authorized unit (e.g., any changes which would require a Class I or Class II permissive change).
A record of the procedures used for production inspection and testing (if tests were performed) to ensure ongoing conformance.
A record of the measurements made on an appropriate
•(i) The actual date or dates testing was performed;
•(ii) The name of the test laboratory, or individual performing the testing. (The Commission may request additional information regarding the test site, the test equipment or the qualifications of the Test laboratory from the client. or individual performing the tests);
•(iii) A description of how the device was actually tested, identifying the measurement procedure and test equipment that was used contained in the test report
•(iv) A description of the equipment under test (EUT) and support equipment connected to, or installed within the EUT
•(v) The identification of the EUT and support equipment by trade name and model number and, if appropriate, by FCC identifier and serial number;
•(vi) The types and lengths of connecting cables used and how they were arranged or moved during testing;
•(vii) At least two photographs showing the test
•(viii) A description of any modifications made to the EUT Client, or individual to achieve compliance with the regulations;
•(ix) All of the data required to show compliance with the appropriate regulations;
•(x) The signature of the individual responsible for testing the product along with the name and signature of an official of the responsible party, as designated in §2.909;
•(xi) A copy of the compliance information (i.e., the DoC), as described in §2.1077, required to be provided with the equipment as follows:
(a)Identification of the product (name and model number);
(b)The unique model name and FCC DoC logo information as specified in §15.19(b)(1) and §15.105, that the product complies with Part 15 of the FCC Rules;
(c)Identification, by name, and address of the responsible party.
SanDisk Corporation | Page 17 of 17 |
DoC Report |
|
2006137 |
|
04/27/07 |
|