BellSouth 2500C manual Manufacturers Name, Product Name, Model Number, Product Options, Safety

21

HP 2500C Declaración de conformidad

DECLARATION OF CONFORMITY

according to ISO/IEC Guide 22 and EN 45014

Manufacturer's Name:	Hewlett-Packard Singapore (Pte) Ltd
Manufacturer's Address:	Asia Hardcopy Manufacturing Operation
	20 Gul Way, Singapore 629196
declares, that the product
Product Name:	HP2500C, HP2500Cse, HP2500Cxi, HP2500CM*
Model Number:	C2684A, C2686A, C2687A, C2685A
Product Options:	All
conforms to the following Product Specifications:
Safety:	IEC 950: 1991 + A1 + A2 + A3 + A4/ EN 60950: 1992 + A1 + A2 + A3 + A4
	IEC825-1: 1993 / EN 60825-1:1994 class I for LEDs
EMC:	CISPR 22: 1993 Class B / EN 55022: 1994 Class B
	CISPR 22: 1993 Class A / EN 55022: 1994 Class A*
	IEN 50082-1: 1992

IEC 801-2: 1991 / prEN 55024-2: 1992, 4kV CD, 8kV AD

IEC 801-3: 1984 / prEN 55024-3: 1991, 3 V/m

IEC 801-4: 1988 / prEN 55024-4: 1992, 0.5kV Signal Lines, 1kV Power Lines

IEC 1000-3-2: 1995 / EN61000-3-2: 1995

IEC 1000-3-3: 1994 / EN61000-3-3: 1995

FCC Title 47 CFR, Part 15 Class B / VCCI-2

FCC Title 47 CFR, Part 15 Class A / VCCI-1*

AS / NZS 3548:1995/ ICES-003, Issue 2

Supplementary Information:

(1)The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and theEMC Directive 89/336/EEC, and carries the CE Marking accordingly.

(2)The product was tested in a typical configuration with Hewlett Packard personal computer systems. (3)This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

*This printer contains Local Area Network (LAN) options. When the interface cable is attached to either of the IEEE802.3 connectors, the printer meets the requirements of CISPR 22: 1993 Class A /EN 55022: 1994 Class A

Singapore, August 1998 Chan Kum Yew, Quality Manager

Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd, 31-41 Joseph Street, Blackburn,Victoria 3130, Australia

European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh, Department

HQ-TRE / Standards Europe, Herrenberger Straße 130, D-71034 Böblingen (FAX: +49-7031-14-3143)

USA Contact: Corporate Product Regulations Manager, Hewlett-Packard Company, 3000 Hanover Street,

Palo Alto, CA 94304 (Phone: 415-857-1501)