Remote Control

NOTE: - The remote control should be directed towards the IR lens located on the front of the GSW12 cabinet. For distance and angle limits please refer to the Set Up Guide (page 2).

1.Mute

Toggle between mute and normal operation. Mute can only be accessed by using the remote control.

2.Power/ Standby

Toggle between standby on/off. Standby can only be operated by the remote control unit. This function will not be operable when using the +12v trigger.

3.LFE

Toggle between LFE and Stereo input. The input mode can only be accessed by using the remote control.

4.Night Mode

Toggle between night mode on/off. Night mode can be accessed by the remote control and by the main control panel menu.

5.Movies

Toggle between movie mode and FLAT/ USER mode.

6.Dynamic

Toggle between dynamic mode and FLAT/ USER mode.

7.Music

Toggle between music mode and FLAT/ USER mode.

8.Impact

Toggle between impact mode and FLAT/ USER mode.

All pre-set EQ’s (5-8) can only be accessed by the remote control.

9.Menu arrow keys

Menu control and settings adjustment. The menu keys work in the same way as the push and turn control knob on the main control panel. Volume is facilitated by the up/down keys by default. Menu scroll is facilitated by the left/right keys.

10.Enter key

Enter settings menu and select desired menu function for adjustment.

11.Exit Key

Exit set up menu. Press once for back a step and again for complete exit from the menu system.

Monitor Audio 2007 GSW12 Rev 1