Boca Research Adjustable MC Ghost user manual Maintenance and Adjustments

Page 15

8.0 Maintenance and Adjustments

Your ticket printer is solidly constructed and has been designed for high volume use. It requires minimal care to provide maximum service.

This section provides an overview of printer maintenance, including parts alignments, adjustment and replacement.

For discussion purposes, the printer consists of two major modules or assemblies:

•Paper guide and print head assembly

•Logic board assembly

As a safety precaution, all service to the printer should be done with power off and the AC cord unplugged from the printer.

8.1 Paper Guide and Print Head Assembly

The principal function of this assembly is to guide the ticket stock to the thermal print head where thermal printing takes place. Additionally, this assembly houses the drive platen and optical detectors. The total assembly can be removed from the unit if necessary, however, all replacements and adjustments of the components of this assembly can be done without removing the total assembly.

The most common adjustments and replacements regarding this assembly follows:

8.1.5 Optical Devices (see figure 8a & 8b)

There are two identical reflective opto devices mounted beneath the print head. The opto on the top controls automatic selection on a Airline boarding pass or a bag tag. There is one see-thru opto device located between the platen and ticket exit slot. This opto controls the initial print position and the manual tear off position.

The opto position is factory set and adjustment should not be necessary.

Caution: Before making any opto adjustments make sure your ticket stock was manufactured to proper specifications.

The ticket load opto should be positioned such that the printer automatically activates the stepper motor at the proper time when tickets are loaded into the printer. When loading tickets, the stepper motor should turn on when the ticket stops in front of the thermal head. At this point, the ticket will be grabbed out of your hand and fed into the printer. If the motor does not activate, make sure the ticket stock is loaded into the printer properly. The printer should advance the ticket to the edge of the cabinate.

9

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Adjustable MC Ghost Ticket Printer Boca SYSTEMS, INC Table of Contents Table of Figures and Appendices FCC Notice Warranty Information Introduction Boca Unpacking the PrinterLCD Tour of Your PrinterMicro Ghost rear view Pin female Main Logic Board BAG TAG InstallationConfiguration Serial Pinouts Standard Interface PinoutsThermal Paper Theory & Specification Paper Guide and Print Head Assembly Maintenance and AdjustmentsPrint position and Tear opto Thermal Print Head Print Head removal Rubber Drive Roller Platen Description Part Number Spare Parts ListPower is on but Ticket will not Load Troubleshooting GuideNo OPERATION, Power Indicator is OUT Power is on but no OperationPrinter Skips Tickets and Dies Erractic Print PositionNo Print OUT Printer Skips Tickets While PrintingAppendix a Operator Menu Options To access and use the Operator MENU, follow these stepsOperator Menu Baud RATE?Mini Diagnostic MODE?Status ENABLED? MINI/MICRO?INC BTP CUT COUNT? Paper MODE?INC BPP CUT COUNT? DEC BPP COUNT?Move Text RIGHT? Just EXIT?Printer TYPE? Flight TYPE?

Adjustable MC Ghost specifications

The Boca Research Adjustable MC Ghost is an innovative addition to the world of audio technology, designed to deliver unparalleled sound quality and versatile performance. It is specifically crafted to cater to the needs of audiophiles and general users alike, boasting a range of features that set it apart from traditional audio devices.

One of the standout features of the Boca Research Adjustable MC Ghost is its state-of-the-art adjustable gain mechanism. This technology allows users to fine-tune their audio experience by adapting the output level based on their specific preferences and the type of audio source being used. This flexibility ensures optimal performance across a variety of situations, enhancing overall listening experiences.

Another significant aspect of the Adjustable MC Ghost is its advanced noise-cancellation technology. By implementing high-performance digital signal processing, the device minimizes unwanted background noise, allowing users to enjoy a clearer, more immersive sound. This feature is particularly beneficial in noisy environments, ensuring that the rich details in the audio are preserved.

The Boca Research design team has also prioritized user convenience, incorporating a user-friendly interface for easy navigation. The device features both analog and digital connectivity options, allowing compatibility with a wide range of audio sources, from vinyl turntables to modern digital streaming platforms.

Furthermore, the Adjustable MC Ghost is built with premium materials that not only enhance its aesthetic appeal but also contribute to its durability. The robust construction ensures that the device withstands the test of time, maintaining high performance even under regular use.

In terms of sound quality, the Boca Research Adjustable MC Ghost excels in delivering balanced audio with a wide frequency response. This allows for rich bass, detailed mids, and crisp highs, ensuring that every genre of music is represented accurately. The implementation of high-quality components ensures minimal distortion, maintaining the integrity of the original sound.

Overall, the Boca Research Adjustable MC Ghost is a game-changer in the audio device market. With its adjustable gain, cutting-edge noise-cancellation technology, user-friendly features, and durable design, it is a must-have for anyone serious about their audio experience. Whether for casual listening or critical music enjoyment, the Adjustable MC Ghost stands out as a premier choice in the world of high-fidelity audio devices.
Top Page Image Contents