Boca Research Adjustable MC Ghost Troubleshooting Guide, No OPERATION, Power Indicator is OUT

Page 21

10.0 Troubleshooting Guide

This is a simplified troubleshooting guide listing some of the typical problems. It is not intended to provide technical details or repair methods, but can serve as a guide to fault isolation in the field. If you need additional help, please contact BOCA at

Tel: (561) 998-9600 Fax: (561) 998-9609

1.NO OPERATION, POWER INDICATOR IS OUT

a.Check the power cord for proper installation at both ends.

b.Check main fuse and replace if blown.

c.Check that there is power at the AC receptacle.

d.If main fuse keeps blowing then check that the line voltage is the same as what's specified on the printer's serial board.

2.POWER IS ON BUT NO OPERATION

a.Check all electrical connections on the printer.

b.Unplug the thermal head and turn on the printer. If printer works, replace the thermal head.

c.Replace the Power Supply board.

d.Replace the Main logic board.

3.POWER IS ON BUT TICKET WILL NOT LOAD

a.See # 2

b.Make sure the print head/cam lock assembly is fully locked in the closed position. Consult “Thermal Print Head” in Section 8.1.2.

c.Check that the ticket stock is being loaded correctly.

d.With printer powered on feed the ticket stocking into the printer until it stops. Depress the test button a couple of times. If the printer reset the ticket stock properly then the feed opto position needs to be adjusted. Consult “Optical Devices” in Section 8.1.1.

e.Replace ticket load opto.

f.Replace ticket tear opto.

g.Replace the Power Supply board.

h.Replace the Main logic board.

4.ERRATIC TEAR POSITION

a.Check for defective ticket stock. Is the black mark unevenly spaced apart or light in color? Is the ticket too wide for the paper path?

b.Clean off opto eyes. Consult “Optical Devices” in Section 8.1.1.

c.Check that the platen is clean. Consult “Rubber Drive Roller” in Section 8.1.3.

d.Replace ticket TEAR opto.

e.Replace ticket load opto.

f.Replace the Power Supply board.

g.Replace the Main logic board.

15

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Adjustable MC Ghost Ticket Printer Boca SYSTEMS, INC Table of Contents Table of Figures and Appendices FCC Notice Warranty Information Introduction Boca Unpacking the PrinterLCD Tour of Your PrinterMicro Ghost rear view Pin female Main Logic Board BAG TAG InstallationConfiguration Serial Pinouts Standard Interface PinoutsThermal Paper Theory & Specification Paper Guide and Print Head Assembly Maintenance and AdjustmentsPrint position and Tear opto Thermal Print Head Print Head removal Rubber Drive Roller Platen Description Part Number Spare Parts ListNo OPERATION, Power Indicator is OUT Troubleshooting GuidePower is on but no Operation Power is on but Ticket will not LoadNo Print OUT Erractic Print PositionPrinter Skips Tickets While Printing Printer Skips Tickets and DiesAppendix a Operator Menu Options To access and use the Operator MENU, follow these stepsOperator Menu Baud RATE?Status ENABLED? Diagnostic MODE?MINI/MICRO? MiniINC BPP CUT COUNT? Paper MODE?DEC BPP COUNT? INC BTP CUT COUNT?Printer TYPE? Just EXIT?Flight TYPE? Move Text RIGHT?

Adjustable MC Ghost specifications

The Boca Research Adjustable MC Ghost is an innovative addition to the world of audio technology, designed to deliver unparalleled sound quality and versatile performance. It is specifically crafted to cater to the needs of audiophiles and general users alike, boasting a range of features that set it apart from traditional audio devices.

One of the standout features of the Boca Research Adjustable MC Ghost is its state-of-the-art adjustable gain mechanism. This technology allows users to fine-tune their audio experience by adapting the output level based on their specific preferences and the type of audio source being used. This flexibility ensures optimal performance across a variety of situations, enhancing overall listening experiences.

Another significant aspect of the Adjustable MC Ghost is its advanced noise-cancellation technology. By implementing high-performance digital signal processing, the device minimizes unwanted background noise, allowing users to enjoy a clearer, more immersive sound. This feature is particularly beneficial in noisy environments, ensuring that the rich details in the audio are preserved.

The Boca Research design team has also prioritized user convenience, incorporating a user-friendly interface for easy navigation. The device features both analog and digital connectivity options, allowing compatibility with a wide range of audio sources, from vinyl turntables to modern digital streaming platforms.

Furthermore, the Adjustable MC Ghost is built with premium materials that not only enhance its aesthetic appeal but also contribute to its durability. The robust construction ensures that the device withstands the test of time, maintaining high performance even under regular use.

In terms of sound quality, the Boca Research Adjustable MC Ghost excels in delivering balanced audio with a wide frequency response. This allows for rich bass, detailed mids, and crisp highs, ensuring that every genre of music is represented accurately. The implementation of high-quality components ensures minimal distortion, maintaining the integrity of the original sound.

Overall, the Boca Research Adjustable MC Ghost is a game-changer in the audio device market. With its adjustable gain, cutting-edge noise-cancellation technology, user-friendly features, and durable design, it is a must-have for anyone serious about their audio experience. Whether for casual listening or critical music enjoyment, the Adjustable MC Ghost stands out as a premier choice in the world of high-fidelity audio devices.
Top Page Image Contents