Boca Research Adjustable MC Ghost user manual Rubber Drive Roller Platen

Page 19

8.1.7 Rubber Drive Roller (Platen)

The rubber drive roller should be cleaned once a year to prevent paper dust from building up on the roller. Clean drive roller with a paper towel and alcohol.

1.Lift up the cam lock assembly (located above the head mounting block) to remove pressure from the thermal head. (see figure 9a)

2.Lift up the head mounting block/thermal head to remove it. (see figure 9b)

3.Clean the full legth of the Platen.

4.Install the head by reversing steps 1 and 2. Printer is now ready for normal operation. (NOTE: The platen may require more frequent cleaning in dusty environments or when using inferior ticket stock.

8.2 Logic Board

The printed circuit boards used in this product have been manufactured using surface mount technology. The printed circuit boards cannot be effectively repaired in the field and should be returned to the manufacturer if repair is required.

This section describes board removal and proper installation.

ALL SERVICES SHOULD BE DONE WITH POWER OFF AND THE AC CORD UNPLUGGED FROM THE PRINTER.

8.2.1 Main Logic Board (Removal)

1.Unplug connectors going to the main logic board.

2.Remove 2 nuts that secure the heat sink to the cabinet.

3.Use a screwdriver to gently wedge the logic board from the fasteners.

4.Lift board and remove.

8.2.2 Main Logic Board (Installation)

1.Align Main Logic Board so that the four mounting holes are above the four fasteners and the heat sink bracket aligns with it's studs.

2.Press logic board down onto the stainless steel fasteners.

3.Attach connectors going to the main logic board.

8.3 General Cleaning

The interior of the printer should be cleaned whenever this is a visible accumulation of dust. Use a small vacuum for cleaning. Be careful not to jar any of the printer’s parts loose.

13

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Adjustable MC Ghost Ticket Printer Boca SYSTEMS, INC Table of Contents Table of Figures and Appendices FCC Notice Warranty Information Introduction Boca Unpacking the PrinterLCD Tour of Your PrinterMicro Ghost rear view Pin female Main Logic Board BAG TAG InstallationConfiguration Serial Pinouts Standard Interface PinoutsThermal Paper Theory & Specification Paper Guide and Print Head Assembly Maintenance and AdjustmentsPrint position and Tear opto Thermal Print Head Print Head removal Rubber Drive Roller Platen Description Part Number Spare Parts ListPower is on but Ticket will not Load Troubleshooting GuideNo OPERATION, Power Indicator is OUT Power is on but no OperationPrinter Skips Tickets and Dies Erractic Print PositionNo Print OUT Printer Skips Tickets While PrintingAppendix a Operator Menu Options To access and use the Operator MENU, follow these stepsOperator Menu Baud RATE?Mini Diagnostic MODE?Status ENABLED? MINI/MICRO?INC BTP CUT COUNT? Paper MODE?INC BPP CUT COUNT? DEC BPP COUNT?Move Text RIGHT? Just EXIT?Printer TYPE? Flight TYPE?

Adjustable MC Ghost specifications

The Boca Research Adjustable MC Ghost is an innovative addition to the world of audio technology, designed to deliver unparalleled sound quality and versatile performance. It is specifically crafted to cater to the needs of audiophiles and general users alike, boasting a range of features that set it apart from traditional audio devices.

One of the standout features of the Boca Research Adjustable MC Ghost is its state-of-the-art adjustable gain mechanism. This technology allows users to fine-tune their audio experience by adapting the output level based on their specific preferences and the type of audio source being used. This flexibility ensures optimal performance across a variety of situations, enhancing overall listening experiences.

Another significant aspect of the Adjustable MC Ghost is its advanced noise-cancellation technology. By implementing high-performance digital signal processing, the device minimizes unwanted background noise, allowing users to enjoy a clearer, more immersive sound. This feature is particularly beneficial in noisy environments, ensuring that the rich details in the audio are preserved.

The Boca Research design team has also prioritized user convenience, incorporating a user-friendly interface for easy navigation. The device features both analog and digital connectivity options, allowing compatibility with a wide range of audio sources, from vinyl turntables to modern digital streaming platforms.

Furthermore, the Adjustable MC Ghost is built with premium materials that not only enhance its aesthetic appeal but also contribute to its durability. The robust construction ensures that the device withstands the test of time, maintaining high performance even under regular use.

In terms of sound quality, the Boca Research Adjustable MC Ghost excels in delivering balanced audio with a wide frequency response. This allows for rich bass, detailed mids, and crisp highs, ensuring that every genre of music is represented accurately. The implementation of high-quality components ensures minimal distortion, maintaining the integrity of the original sound.

Overall, the Boca Research Adjustable MC Ghost is a game-changer in the audio device market. With its adjustable gain, cutting-edge noise-cancellation technology, user-friendly features, and durable design, it is a must-have for anyone serious about their audio experience. Whether for casual listening or critical music enjoyment, the Adjustable MC Ghost stands out as a premier choice in the world of high-fidelity audio devices.
Top Page Image Contents