Bacharach 24-9422 manual Sensors, SELPushbuton

IrDA Printer Description

Sensors

There are three sensors that perform the following functions:

•Paper Cover: When the paper cover is open the printer is disabled to prevent damage to the print head. This condition is indicated by the Power LED flashing.

•Paper Out: When the paper roll runs out, the printer is disabled to prevent damage to the print head. This condition is indicated by the Power LED flashing.

•IrDA: Located at the front of the printer, this sensor accepts the infra- red signal from the instrument.

Power

OFF ON

SELPushbuton:

1)HolddownandturnprinterON toenterSet-UpMode.

2)OnceinSet-UpMode,pressto changeprinterparameter.

Power/Error(Green)LED:

1)Glowssteadywhenprinteris turnedON.

2)Flasheswhenprinterisoutofpaper; whenpapercoverisopen;orwhen printheadtemp.isabove140°F.

Batery(Red)LED:

1)Glowssteadywhenbaterypackis beingcharged.

2)Flasheswhenbateryisfulycharged.

IrDASensor

FEEDPushbuton:

1)WithprinteralreadyON,pressto advancepaper.

2)WithprinterinitsSet-UpMode,press tochangevalueofprinterparameter aschosenbytheSELbuton.

3)HolddownandturnprinterON toenterSeft-TestMode.

PaperCover

BateryCover

PowerConnector RS-232CConnector

Figure 1. Component Locations and Functions

Instruction 24-9422 3