Printing with Microsoft PowerPoint 95, 97 and 2000
1.Select Print from the File menu. The Print dialog box appears.
2.Select FujiFilm PP3000 or the PP3000WIDE and click Properties. The FujiFilm PP3000 or the PP3000WIDE properties sheet appears.
3.Configure the Paper tab.
•Roll Paper Size: Select the roll width that matches the installed paper.
•Print Paper Size: Select the standard page size or create a custom page size.
•Gaps Between Pages: Check this option.
Note: Standard pages are indicated by an asterisk (*) following the page size. For instructions on creating custom pages, see the FujiFilm PosterPrinter 3000/3000Wide Interface Kit User’s Guide.
•Document Size: Select US Letter.
•Processor Speed: Select Middle.
•Orientation: Select Portrait or Landscape.
4.Click OK. The Print dialog box reappears.
5.In the Print dialog box click Cancel.
6.Select Slide Setup or Page Setup from the File menu. The Slide or Page Setup dialog box appears.
7.Select Custom in the Slides Sized For field. The Width and Height fields adjust automatically.
8.Select the orientation you selected in Step 3.
9.Click OK.
10.Select Print from the File menu. The Print dialog box appears.
11.Select Scale to Fit Paper. A check mark appears in the check box when you select the option.
12.Deselect Black and White, Pure Black and White, and Grayscale in PowerPoint 2000. No check mark appears in the check boxes when you deselect the option.
13.Click OK to begin printing.
Tips
•The margins cannot be altered.
•The maximum document size is 56" x 56" (1420 x 1420 mm).
ProImage Plus3000/XL3000 PosterPrinter Helpful Tips | Page 8 |