Brady XL3000, Plus3000 manual Printing with CorelDRAW, Tip

Printing with CorelDRAW 7.0

1.Select Print from the File menu. The Print dialog box appears.

2.Select the FujiFilm PP3000 or the PP3000WIDE print driver and click Properties. The FujiFilm PP3000 or the PP3000WIDE properties sheet appears.

3.Configure the Paper tab as follows:

•Roll Paper Size: Select the roll width that matches the installed paper.

•Print Paper Size: Select the standard page size or create a custom page size.

•Gaps Between Pages: Check this option.

Note: Standard pages are indicated by an asterisk (*) following the page size. For instructions on creating custom page sizes, see the FujiFilm PosterPrinter 3000/3000Wide Interface Kit User’s Guide.

•Document Size: Select US Letter.

•Processor Speed: Select Middle.

•Orientation: Select Portrait or Landscape.

4.Click OK. The Print dialog box reappears.

5.Click Options. The Print Options dialog box appears.

6.Select the Fit to page option. A check mark appears in the check box when you select the option.

7.Click OK to redisplay the Print dialog box.

8.Click OK to begin printing.

Tip

•For non-standard page sizes, select the Set From Printer option in the Layout, Page Setup dialog box. You may also need to toggle between Portrait and Landscape to get CorelDRAW to update page sizes.

ProImage Plus3000/XL3000 PosterPrinter Helpful Tips Page 6