Advantek Networks APS-U3100 user manual Netware Status

Page 29

Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related settings automatically from your DHCP server.

IP Address: This option allows you to view IP address from the print server. The IP address must meet the IP addressing requirements of the network segment. (default: 192.168.0.10)

Subnet Mask: This option allows you to view subnet mask from the print server.

Gateway’s IP: This option allows you to view gateway from the print server.

Netware Status:

1.Click Status, it then appears the sub-menu.

2.Click Netware it then as shown in the following picture.

Image 29

Contents Ports Print Server USB 2.0 + 1 Parallel Print Server Installation Network Print Monitor Trademarks State Indication IntroductionRear Panel Before you start, you should prepare the following itemsWired Network with Print Server Print Server InstallationNetwork Environment PreparationConfiguration Solution Table HP Web JetAdminEmbedded Web server Internet Printing ProtocolInstalling the PSAdmin and Print Server’s Driver Software InstallationPage Page Page Page Page Page Using PSAdmin TCP/IP Wizard WizardNetWare Wizard Manual Setup Specify an IP address Properties -TCP/IP OptionsObtain an IP address from a Dhcp server Refresh UpgradeReset Procedure Multiple Print Queues ConfigurationUninstalling the PSAdmin on Windows PC IPP Overview Internet Printer Connection and HP Web JetAdminWindows NT/2000/XP/2003 Page System Requirements Installing HP Web JetAdmin HP Web JetAdmin OverviewConfirming Installation and Supply Access Configuring and Modifying a DeviceUsing Embedded Web Server Configuration from Embedded Web ServerOverview Status MenuPage TCP/IP Status Printer StatusNetware Status NetWare Bindery Setting General SettingsNetWare NDS Setting Snmp Status AppleTalk StatusPage System Setup Setup MenuRe-type Password Printer SetupNetWare Setup TCP/IP SetupPage Installation Procedure Installing Print Server on NetWare 4.x/5.xAppleTalk Setup Snmp Setup Setting Up a Macintosh ComputerMIB Object Names / Description Activities/SNMP Trap Messages / DescriptionSMB Setup Page Network Print Monitor TCP/IP Protocol InstallationPreparation NetBEUINetBEUI Protocol Installation IPX/SPX-compatible Protocol InstallationPage Page Basic TCP/IP Installation Overview TCP/IP LPR Port Printing InstallationAssigning an IP Address Use the Network Print Monitor utilityPage Page Page SCO Unix 8.0.0 Caldera Open Unix Unix InstallationRedhat Linux System V Release 4 UnixPage Page Upgrading the print server from Unix Through TCP/IP Upgrading the print server from PSAdminUpgrading Print Server Upgrading the print server from Browser Troubleshooting Multi-Segment Frame Type 802.2 Installation Print Port Related ProblemsWindows 95/98/Me/NT/2000/XP/2003 Troubleshooting Moving the print server to a New Segment Print Server Reconfiguration Procedure on Windows 95/98/MePrint server Reconfiguration Procedure on Windows NT Moving Your Computer to a New Segment Novell NetWare TroubleshootingTCP/IP Troubleshooting If the gateway computer is a Novell NetWare file server If the gateway computer is a NT/UNIX serverPage SMB Printing with Windows XP AppendixPage Page Reboot the Print server Reset ButtonQuestion B Frequently Asked QuestionsQuestion a Question E Question DQuestion F Question GAdditional Installation Instructions