Advantek Networks APS-U3100 user manual Software Installation

Page 9

3. Software Installation

The PSAdmin is a proprietary Windows-based management program that can assist you in configuring and managing your print server in NetWare environments. The program can be installed from the setup CD of print server.

Installing the PSAdmin and Print Server’s Driver

1.To enable network communication with print server, your computer must have a proper IP address, e.g. 192.168.0.100 (the print server’s default IP is 192.168.0.10)

2.Insert the setup CD into your CD-drive, and the following message appears:

3. Choose Setup Wizard to install the print server and configure the connected printer.

Image 9

Contents Ports Print Server USB 2.0 + 1 Parallel Print Server Installation Network Print Monitor Trademarks State Indication IntroductionRear Panel Before you start, you should prepare the following itemsWired Network with Print Server Print Server InstallationNetwork Environment PreparationConfiguration Solution Table HP Web JetAdminEmbedded Web server Internet Printing ProtocolInstalling the PSAdmin and Print Server’s Driver Software InstallationPage Page Page Page Page Page Using PSAdmin TCP/IP Wizard WizardNetWare Wizard Manual Setup Properties -TCP/IP Options Obtain an IP address from a Dhcp serverSpecify an IP address Upgrade ResetRefresh Multiple Print Queues Configuration Uninstalling the PSAdmin on Windows PCProcedure Internet Printer Connection and HP Web JetAdmin Windows NT/2000/XP/2003IPP Overview Page System Requirements Installing HP Web JetAdmin HP Web JetAdmin OverviewConfirming Installation and Supply Access Configuring and Modifying a DeviceUsing Embedded Web Server Configuration from Embedded Web ServerOverview Status MenuPage TCP/IP Status Printer StatusNetware Status General Settings NetWare NDS SettingNetWare Bindery Setting Snmp Status AppleTalk StatusPage System Setup Setup MenuRe-type Password Printer SetupNetWare Setup TCP/IP SetupPage Installation Procedure Installing Print Server on NetWare 4.x/5.xAppleTalk Setup Snmp Setup Setting Up a Macintosh ComputerMIB Object Names / Description Activities/SNMP Trap Messages / DescriptionSMB Setup Page Network Print Monitor TCP/IP Protocol InstallationPreparation NetBEUINetBEUI Protocol Installation IPX/SPX-compatible Protocol InstallationPage Page Basic TCP/IP Installation Overview TCP/IP LPR Port Printing InstallationAssigning an IP Address Use the Network Print Monitor utilityPage Page Page SCO Unix 8.0.0 Caldera Open Unix Unix InstallationRedhat Linux System V Release 4 UnixPage Page Upgrading the print server from PSAdmin Upgrading Print ServerUpgrading the print server from Unix Through TCP/IP Upgrading the print server from Browser Troubleshooting Print Port Related Problems Windows 95/98/Me/NT/2000/XP/2003 TroubleshootingMulti-Segment Frame Type 802.2 Installation Print Server Reconfiguration Procedure on Windows 95/98/Me Print server Reconfiguration Procedure on Windows NTMoving the print server to a New Segment Novell NetWare Troubleshooting TCP/IP TroubleshootingMoving Your Computer to a New Segment If the gateway computer is a Novell NetWare file server If the gateway computer is a NT/UNIX serverPage SMB Printing with Windows XP AppendixPage Page Reboot the Print server Reset ButtonFrequently Asked Questions Question aQuestion B Question E Question DQuestion F Question GAdditional Installation Instructions