Siemens 4200 Series, 4100 Series manual General Provisions

Page 3

SSN will not honor, and will consider the warranty voided, if: (1) the seal or serial number on the Product have been tampered with; (2) the Product’s case has been opened; or (3) there has been any attempted or actual repair or modification of the Product by anyone other than an SSN authorized service provider.

The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items, including framing, and any non-operative parts.

SSN’s limit of liability under the limited warranty shall be the actual cash value of the product at the time the end user returns the product for repair, determined by the price paid by the end user for the product less a reasonable amount for usage. SSN shall not be liable for any other losses or damages.

The end user will be billed for any parts or labor charges not covered by this limited warranty. The end user will be responsible for any expenses related to reinstallation of the product.

THIS LIMITED WARRANTY IS THE ONLY WARRANTY SSN MAKES FOR THE PRODUCT AND SOFTWARE. TO THE EXTENT ALLOWED BY LAW, NO OTHER WARRANTY APPLIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

6.Out of Warranty Repair. Out of warranty repair is available for fixed fee. Please contact SSN at the numbers provided above to determine the current out of warranty repair rate. End users seeking out of warranty repair should contact SSN as described above to obtain an RMA and to arrange for payment of the repair charge. All shipping charges will be billed to the end user.

General Provisions

The following general provisions apply to the foregoing Software License and Limited Warranty:

1.No Modification. The foregoing limited warranty is the end user’s sole and exclusive remedy and is in lieu of all other warranties, express or implied. No oral or written information or advice given by SSN or its dealers, distributors, employees or agents shall in any way extend, modify or add to the foregoing Software License and Limited Warranty. This Software License and Limited Warranty constitutes the entire agreement between SSN and the end user, and supersedes all prior and contemporaneous representation, agreements or understandings, oral or written. This Software License and Limited Warranty may not be changed or amended except by a written instrument executed by a duly authorized officer of SSN.

SSN neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other obligation or liability beyond that which is expressly provided for in this limited warranty including the provider or seller of any extended warranty or service agreement.

The limited warranty period for SSN supplied attachments and accessories is specifically defined within their own warranty cards and packaging.

2.EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER DAMAGES. TO THE FULL EXTENT PERMITTED BY LAW, IN NO EVENT SHALL SSN BE LIABLE, WHETHER UNDER CONTRACT, WARRANTY, TORT OR ANY OTHER THEORY OF LAW FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, PERSONAL INJURY, LOSS OR IMPAIRMENT OF DATA OR BUSINESS INFORMATION, EVEN IF SSN HAS BEEN NOTIFIED OF THE POSSIBILITY OF SUCH DAMAGES. SSN’S LIABILITY TO YOU (IF ANY) FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHATSOEVER, AND REGARDLESS OF THE FORM OF THE ACTION, WILL BE LIMITED TO, AND SHALL NOT EXCEED, THE AMOUNT PAID FOR THE HARDWARE/SOFTWARE.

3.General. This Software License and Limited Warranty will be covered by and construed in accordance with the laws of the State of Texas, United States (excluding conflicts of laws rules), and shall inure to the benefit of SSN and its successor, assignees and legal representatives. If any provision of this Software License and Limited Warranty is held by a court of competent jurisdiction to be invalid or unenforceable to any extent under applicable law, that provision will be enforced to the maximum extent permissible, and the remaining provisions of this Software License and Limited Warranty will remain in full force and effect. Any notices or other communications to be sent to SSN must be mailed by certified mail to the following address:

Siemens Subscriber Networks

4849 Alpha Road

Dallas, TX 75244

U.S.A.

Attn: Customer Service

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Series 4100 SpeedStream→ Router User’s GuideSoftware License General Provisions Contents Level Snooze Admin UserInterface Map Reboot Update Dynamic DNSIntroduction Features of the SpeedStream RouterNetwork LAN Features Security FeaturesAdvanced Router Functions General Safety GuidelinesConfiguration & Management Minimum System RequirementsResidential Gateway Family User Guide Physical InstallationHardware Installation Basic Installation ProcedureInstalling Line Filters In-Line FilterWall-Mount Filter Connect the DSL cable Connecting CablesConnect the power Connect the Ethernet cablesConnect the USB Cable Install USB Driver SoftwareCheck TCP/IP Protocol Settings Operating System ConfigurationChecking TCP/IP Settings Windows 9x/ME Checking TCP/IP Settings Windows Checking TCP/IP Settings Windows XP Ethernet Adaptor en0,en1,… if connecting via USB Checking TCP/IP Settings MAC OS 8.6 throughChecking TCP/IP Settings MAC OSX For Windows XP Internet Access ConfigurationClick Setup. This starts the New Connection Wizard For Windows 9x/2000Before Configuring the Router SpeedStream Router SetupDo not require admin login Connecting to the RouterRequire admin login to access entire Web site Require admin login to access configuration pagesSelecting PPP Connection PPP Login Home Window Add User Profiles Configuring User ProfilesDisable all Content Filtering Require admin login to access configuration pages Deleting User Profiles Editing User ProfilesWAN Interface Configuring ISP Connection SettingsHost Enable DisableDhcp Relay Click Infinite Time Click Save SettingsStatic Routes RFC2684 EnabledRIP Configuring Network SettingsRIP Routing Information Protocol Port Forwarding UPnP Universal Plug and Play Bridge Mode Server Ports Dynamic DNS Time Client Configuring Security FeaturesAdmin User Time Client Select Enable from Enable Time ClientNAT&NAPT Enabled NAT & Napt DisabledNAT Only Enabled Napt Only EnabledSnooze FirewallLevel Snooze Disable SnoozeEnable Snooze, and set the Snooze time interval to Reset the Snooze time interval toMake Settings Last for Disable DMZEnable DMZ with this Host IP address Make Settings PermanentFilter Rules This IP Address Any IP Address− Any Protocol − TCP Transmission Control Protocol Greater than or equal to AnyLess than or equal to Equal toIcmp Options Window Clone IP Filter Rules Log Select Enable Attack Detection Same Source and Destination AddressBroadcast Source Address Fragmented TCP Header LAN Source Address on LANInvalid IP Packet Fragment Fragmented TCP PacketStatus and Statistics Monitoring Router HealthSystem Log System SummaryATM Statistics Ethernet Statistics Diagnostics Interface Map ToolsReset to system defaults RebootUpdate RemoteLocal Basic Troubleshooting Steps TroubleshootingInterpreting the LED Display Post Failure red pwr LED Resolving Specific IssuesContacting Technical Support Parameter Default Value Your Value Configuration Data SheetsAdministrative User Setup Parameter Default Value Your Value User Name Admin PasswordFirewall Custom IP Filter Configuration Router User’s Guide Configuration Data Sheets Parameter Default Value Your Value Firewall Level Parameter Default Value Your Value LevelParameter Default Value Firewall DMZParameter Default Value Your Value Port Forwarding PPP Login Parameter Default Value Your Value Log Capture Level Static RouteSystem Log UPnP Technical Specifications Routing Standards Compliance Firewall Security Levels Security Application High Medium Low Napt OffProtocol Compliant Out Http Https Icmp Rtsp SIP Smtp Siemens Subscriber Networks

4100 Series, 4200 Series specifications

Siemens has established itself as a leader in industrial automation with its innovative series of simulators, notably the 4200 Series and 4100 Series. Both series are designed to enhance operational efficiency and provide robust solutions across various industries, including manufacturing, logistics, and process engineering.

The Siemens 4200 Series is particularly known for its advanced functionalities. One of its main features is the integration of state-of-the-art motion control technology, enabling precise handling of complex automated processes. This series incorporates real-time control capabilities, allowing users to respond rapidly to changing production demands. Additionally, the 4200 Series supports a flexible architecture, which can be customized based on specific operational requirements. This adaptability ensures that businesses can optimize their workflow without significant overhauls to existing systems.

On the other hand, the 4100 Series offers an impressive combination of versatility and efficiency. This series is engineered with a focus on cost-effectiveness, making it suitable for small to medium-sized enterprises. A notable feature of the 4100 Series is its user-friendly interface, which simplifies the programming and monitoring of automation processes. The series also boasts comprehensive diagnostics tools that aid in minimizing downtime through proactive maintenance. The 4100 Series is designed to streamline operations, offering users the ability to integrate seamlessly with existing Siemens components.

Both series utilize cutting-edge technologies such as IoT connectivity, allowing for real-time data exchange and analytics. This capability enhances decision-making processes, as businesses can monitor their production systems remotely and make adjustments based on live data. Furthermore, energy efficiency is a crucial characteristic of both the 4200 and 4100 Series, with features designed to reduce energy consumption and overall operational costs.

In conclusion, the Siemens 4200 and 4100 Series stand out for their innovative features, robust technologies, and adaptability to various industrial applications. They provide comprehensive solutions that empower businesses to enhance productivity, achieve greater efficiency, and adapt to the rapidly changing technological landscape. As industries continue to evolve, Siemens remains at the forefront, delivering automation solutions that meet contemporary needs while paving the way for future advancements.
Top Page Image Contents