Siemens 4200 Series, 4100 Series manual UPnP Universal Plug and Play

Page 37

Router User’s Guide

Configuring Network Settings

UPnP (Universal Plug and Play)

Microsoft UPnP allows the Router to communicate directly with certain Windows operating systems to trade information about the special needs of certain applications (such as messaging programs and interactive games) as well as provide information about other devices on the network, where applicable. This communication between the operating system and Router greatly reduces the amount of manual configuration required to use new applications and devices.

Only certain versions of Windows XP and computer support the UPnP (Universal Plug and Play) function. Before configuring this option, you must ensure that the UPnP component is installed on your computer and enabled.

To enable UPnP functionality:

1.Select Setup>UPnP from the left navigation pane of the Web interface. This displays the “UPnP Configuration” window.

2.Select one of the following control options.

•Disable UPnP

Prevents the Router from using the UPnP feature to communicate with other devices or your operating system. Also may be disabled if your operating system does not support UPnP.

•Enable Discovery and Advertisement only (SSDP)

Sends information about new devices (hardware) detected only. No information concerning software applications or services is transmitted.

•Enable full Internet Gateway Device (IGD) support

Allows the Router to communicate freely with computers on the network about new devices, software applications, and services as needed to ensure they are working with minimal manual configuration required.

3.Select one of the following options:

•Enable access logging

Generates a system log message whenever an UPnP client accesses the router.

•Read-only mode

Restricts the kind of access an UPnP client can have into the router. Only requests in the UPnP protocol that query the status of the router are allowed. Any requests that could potentially modify the router’s behavior are blocked.

4.Click Apply to accept the settings. This displays the “UPnP Finish” window.

34

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Series 4100 SpeedStream→ Router User’s GuideSoftware License General Provisions Contents Interface Map Reboot Update Admin UserDynamic DNS Level SnoozeNetwork LAN Features Features of the SpeedStream RouterSecurity Features IntroductionConfiguration & Management General Safety GuidelinesMinimum System Requirements Advanced Router FunctionsHardware Installation Physical InstallationBasic Installation Procedure Residential Gateway Family User GuideIn-Line Filter Installing Line FiltersWall-Mount Filter Connect the power Connecting CablesConnect the Ethernet cables Connect the DSL cableConnect the USB Cable Install USB Driver SoftwareCheck TCP/IP Protocol Settings Operating System ConfigurationChecking TCP/IP Settings Windows 9x/ME Checking TCP/IP Settings Windows Checking TCP/IP Settings Windows XP Ethernet Adaptor en0,en1,… if connecting via USB Checking TCP/IP Settings MAC OS 8.6 throughChecking TCP/IP Settings MAC OSX Click Setup. This starts the New Connection Wizard Internet Access ConfigurationFor Windows 9x/2000 For Windows XPBefore Configuring the Router SpeedStream Router SetupRequire admin login to access entire Web site Connecting to the RouterRequire admin login to access configuration pages Do not require admin loginSelecting PPP Connection PPP Login Home Window Add User Profiles Configuring User ProfilesDisable all Content Filtering Require admin login to access configuration pages Deleting User Profiles Editing User ProfilesWAN Interface Configuring ISP Connection SettingsHost Disable EnableDhcp Relay Click Infinite Time Click Save SettingsStatic Routes RFC2684 EnabledRIP Configuring Network SettingsRIP Routing Information Protocol Port Forwarding UPnP Universal Plug and Play Bridge Mode Server Ports Dynamic DNS Time Client Configuring Security FeaturesAdmin User Time Client Select Enable from Enable Time ClientNAT Only Enabled NAT & Napt DisabledNapt Only Enabled NAT&NAPT EnabledSnooze FirewallLevel Enable Snooze, and set the Snooze time interval to Disable SnoozeReset the Snooze time interval to SnoozeEnable DMZ with this Host IP address Disable DMZMake Settings Permanent Make Settings Last forFilter Rules This IP Address Any IP Address− Any Protocol − TCP Transmission Control Protocol Less than or equal to AnyEqual to Greater than or equal toIcmp Options Window Clone IP Filter Rules Log Same Source and Destination Address Select Enable Attack DetectionBroadcast Source Address Invalid IP Packet Fragment LAN Source Address on LANFragmented TCP Packet Fragmented TCP HeaderStatus and Statistics Monitoring Router HealthSystem Log System SummaryATM Statistics Ethernet Statistics Diagnostics Interface Map ToolsReset to system defaults RebootRemote UpdateLocal Basic Troubleshooting Steps TroubleshootingInterpreting the LED Display Post Failure red pwr LED Resolving Specific IssuesContacting Technical Support Administrative User Setup Configuration Data SheetsParameter Default Value Your Value User Name Admin Password Parameter Default Value Your ValueFirewall Custom IP Filter Configuration Router User’s Guide Configuration Data Sheets Parameter Default Value Your Value Parameter Default Value Parameter Default Value Your Value LevelFirewall DMZ Firewall LevelParameter Default Value Your Value Port Forwarding PPP Login Static Route Parameter Default Value Your Value Log Capture LevelSystem Log UPnP Technical Specifications Routing Standards Compliance Security Application High Medium Low Napt Off Firewall Security LevelsProtocol Compliant Out Http Https Icmp Rtsp SIP Smtp Siemens Subscriber Networks

4100 Series, 4200 Series specifications

Siemens has established itself as a leader in industrial automation with its innovative series of simulators, notably the 4200 Series and 4100 Series. Both series are designed to enhance operational efficiency and provide robust solutions across various industries, including manufacturing, logistics, and process engineering.

The Siemens 4200 Series is particularly known for its advanced functionalities. One of its main features is the integration of state-of-the-art motion control technology, enabling precise handling of complex automated processes. This series incorporates real-time control capabilities, allowing users to respond rapidly to changing production demands. Additionally, the 4200 Series supports a flexible architecture, which can be customized based on specific operational requirements. This adaptability ensures that businesses can optimize their workflow without significant overhauls to existing systems.

On the other hand, the 4100 Series offers an impressive combination of versatility and efficiency. This series is engineered with a focus on cost-effectiveness, making it suitable for small to medium-sized enterprises. A notable feature of the 4100 Series is its user-friendly interface, which simplifies the programming and monitoring of automation processes. The series also boasts comprehensive diagnostics tools that aid in minimizing downtime through proactive maintenance. The 4100 Series is designed to streamline operations, offering users the ability to integrate seamlessly with existing Siemens components.

Both series utilize cutting-edge technologies such as IoT connectivity, allowing for real-time data exchange and analytics. This capability enhances decision-making processes, as businesses can monitor their production systems remotely and make adjustments based on live data. Furthermore, energy efficiency is a crucial characteristic of both the 4200 and 4100 Series, with features designed to reduce energy consumption and overall operational costs.

In conclusion, the Siemens 4200 and 4100 Series stand out for their innovative features, robust technologies, and adaptability to various industrial applications. They provide comprehensive solutions that empower businesses to enhance productivity, achieve greater efficiency, and adapt to the rapidly changing technological landscape. As industries continue to evolve, Siemens remains at the forefront, delivering automation solutions that meet contemporary needs while paving the way for future advancements.
Top Page Image Contents