JVC LWT0254-001B-H manual Auto Patrol Setup, Set a patroll position, Change the Auto Patrol mode

Setting Up the Camera Using RM-P2580 (continued)39

EN

AUTO PATROL Setup

	High
	speed
POSITION		POSITION
		2
1
High speed		High speed
POSITION	speed
	High	POSITION
4
		3
MENU button		POSITION button
SET button		PAN lever
CAMERA button

						REMOTE CONTROL UNIT RM-P2580
SETUP		CAMERA			POSITION
		POWER
MENU	SET	ALARM				AUTO	F-1	F-2	F-3
		KEY LOCK
	LENS		CAMERA/POSITION					PAN/TILT
	SPEED	1	2	3	CAMERA	POSI-
						TION

CLOSE IRIS		4	5	6	1	2
	OPEN				OPTION	OPTION

NEAR	FOCUS	FAR	7	8	9	AUTO	AUTO
	AF					PAN	PATROL
WIDE	ZOOM	TELE	CLEAR	0	ENTER
				/HOME

TELE	FAR	ENTER	AUTO
button	button	button	PATROL
WIDE button			button

NEAR button

AUTO PAN / PATROL / TRACE

AUTO PAN SET..

AUTO PATROL SET..

AUTO TRACE SET..

AUTO PAN / TRACE VIDEO ..

RM . A . PAN KEY	A . PAN
RM . A . PATROL KEY	A . PATROL

<MENU> RETURN <SET> SUB MENU

AUTO PAN/PATROL/TRACE Screen

Use the AUTO PATROL screen to set the configuration of the Auto Patrol function, which moves the camera between several positions at a high speed. Patrol positions 1-100 can be set in each of three modes (MODES 1 to 3). It is recommended that these three modes be set according to the day of the week or the time of day. For example: MODE 1 for nighttime and MODE 2 for daytime.

1 Select the camera. (A RM-P2580 AINSTRUCTIONSB)

CAMERA buttonNNumeric key (Camera Number)NENTER button

●The picture of the selected camera is output.

2 Display the MENU screen. (A pg. 21, steps 2 to 4)

MENU button (3 sec.) N Select ACAMERA..B using the PAN lever NSET button.

●The AMENUB screen will be displayed.

3 Tilt the PAN lever up or down to move the cursor (E) to AAUTO PAN/PATROL/TRACE..B and press the SET button.

●The AAUTO PAN/PATROL/TRACE..B screen is displayed.

4 Move the cursor (E) to AAUTO PATROL SET..B and press the

SET button.

●The AAUTO PATROL SET MODE 1B screen is displayed.

5 Tilt the PAN lever to move the cursor (E) to the PATROL position to be set.

●To display the next page (PATROL positions 9 to 19), press the TELE button.

●To display the previous page, press the WIDE button.

6 Set a patroll position.

POSITION buttonNNumeric key (position number) N ENTER button

●Positions from PATROL 1 to 100 are set in the order of HOME, followed by POS 1 to POS 99.

7 Set the length of time a camera will stay in each position.

●Use the PAN lever to the left or right to set the time period.

●Available set values: SKIP, 10s, 20s, 30s, 45s, 1min, 2min. (Selecting ASKIPB skips that position and moves to the next position.)

●The factory setting is 10s for all positions.

8 Repeat steps 5 to 7 for each patrol position.

●Set the patrol positions and time periods of all patrol numbers in the same way.

AUTO PATROL SET MODE 1

PATROL 1	HOME	10s
PATROL 2	POS 1	10s
PATROL 3	POS 2	10s
PATROL 4	POS 3	10s
PATROL 5	POS 4	10s
PATROL 6	POS 5	10s
PATROL 7	POS 6	10s
PATROL 8	POS 7	10s

<FOCUS> MODE <ZOOM> PAGE <MENU> RETURN

AUTO PATROL SET MODE 1 Screen (Example showing PATROL Nos.1 to 8)

AUTO PATROL SET MODE 1

PATROL 9	POS 8	10s
PATROL 10	POS 9	10s
PATROL 11	POS 10	10s
PATROL 12	POS 11	10s
PATROL 13	POS 12	10s
PATROL 14	POS 13	10s
PATROL 15	POS 14	10s
PATROL 16	POS 15	10s

<FOCUS> MODE <ZOOM> PAGE <MENU> RETURN

9 Change the Auto Patrol mode.

●Press the FAR button or NEAR button to change the mode.

●After changing to a new mode, repeat steps 5 to 8.

10Press the MENU button.

●The screen returns to the previous menu.

●After the above setup, Auto Patrol of the camera can be started by pressing the AUTO PATROL button on the RM-P2580.

●To change the Auto Patrol mode after the above setup, display the AUTO PATROL SET MODE screen and press the FAR button or NEAR button.

●The Auto Patrol function can only be set from an RM-P2580. Note that it differs to auto sequence operations available with other remote control units.

AUTO PATROL SET MODE 1 Screen (Example showing PATROL Nos. 9 to 16)