Connections & Installation (continued)
Installing the Ceiling Mount
CAUTIONS
●Attachment of a recessed cover in the ceiling (recess bracket) may be mandatory in certain regions. If this is so, ensure that the recessed cover (recess bracket) is securely attached before installing the camera.
●Please refer to the instruction manual of the cover in use for details on installation of the recessed cover (recess bracket).
●For more detail, please contact the JVC dealers.
Ceiling
Embedded Cover Ceiling (recess bracket)
1 Attach the Safety Wire
Connect the ceiling slab or channel to the ceiling mount using a safety wire to prevent the camera from falling down. Make use of the Safety Wire Mounting Hole to connect the ceiling mount and the wire. (Refer to diagram below.)
Attach to Ceiling
Slab or Channel
Safety Wire
Ceiling Mount
Safety Wire
Mounting Hole
CAUTION
Choose a wire and ceiling structure with an appropriate length and strength that may prevent danger in case the camera falls down.
MEMO
●Connect the wire in such a way that it can be insulated from the ceiling structure. If the ceiling structure is made of a metallic material, improper insulation with the camera may cause noise interference in the images.
●Safety wires are not provided. Please purchase commercially available wires separately.
EN 19
2 Fasten the ceiling mount to the ceiling
Align the ADFRONT markB to the front direction that the camera is facing, and fasten the ceiling mount to the ceiling using the 4 screws while paying attention not to catch the connection cables.
Use
NTOFR
DFRONT
Mark
Direction camera is facing
Screws
MEMO
●Be sure to use 4 screws and attach them firmly.
●The sheet attached to the
during installation.
