Siemens 2602 manual Configure TCP/IP for the SpeedStream, Dynamic IP Allocation via a Dhcp Server

Page 23

Figure 4-2. Select Network Protocol

6.The TCP/IP protocol will be listed in the Network window. Click OK to complete the install procedure, and restart your computer to enable the TCP/IP protocol.

Configure TCP/IP for the SpeedStream 2602

When TCP/IP is installed on your computer, follow these instructions to configure it for the SpeedStream 2602:

1.On the Windows taskbar, click Start Settings Control Panel.

2.Double-click the Network icon; then click the Configuration tab and select the TCP/IP for your network card.

3.Click the Properties button to enter the TCP/IP properties for the SpeedStream 2602. You can dynamically assign TCP/IP address settings to a client, or you can manually configure a client with address settings to meet your specific network requirements. (Note that the default IP address of the SpeedStream 2602 is 192.168.254.254.)

Dynamic IP Allocation via a DHCP Server

1.On the IP Address tab, select Obtain an IP address automatically.

2.Do not enter any values under the Gateway tab.

3.On the DNS Configuration tab, select Disable DNS. These settings will be automatically configured by the DHCP server.

4-2

Image 23

Contents 2602 Table of Contents Appendixes About the SpeedStream Features and BenefitsIntroduction Applications Description of Hardware Installing the SpeedstreamPackage Contents Description SpeedStream 2602 DSL/Cable RouterBefore Starting Hardware InstallationInstallation Procedure System RequirementsAdapter or to another network device Ports Color Condition Status Reboot the computer when promptedNavigating the Management Interface Configuring the SpeedstreamWeb Browser Management Interface Menu Item Description Configuration ChangesMenu Selections Field Description View Network and Device StatusOn the Tools menu, click Internet Options General box, select Temporary Internet FilesSet the Time Zone Simple Setup ProceduresSet or Change a Password Configure the WAN ConnectionDynamic IP Address Dhcp Configure LAN Gateway and Dhcp Settings Advanced Setup ProceduresEnable Virtual Server Enable Firewall ProtectionNetwork Address Translation NAT Configure Special ApplicationsConfigure Client Filtering Configure Miscellaneous FeaturesSystem Tools On the Tools menu, click Change PasswordBackup Settings Reset RouterRestore Factory Defaults Update FirmwareClick Start/Settings then click Control Panel Installing and Configuring TCP/IPInstall the TCP/IP Protocol Dynamic IP Allocation via a Dhcp Server Configure TCP/IP for the SpeedStreamTCP/IP Verification Manual IP ConfigurationIs TCP/IP properly configured on your computer? Windows 95/98/NT Configuring Printer ServicesInstall the Printer Port Monitor Windows 95/98/NT Configure the Print ServerClick to add a Local printer or Network printer WindowsWindows ME Unix SystemsAppendix a TroubleshootingTable A-1. Troubleshooting Chart Technical Support Ethernet Cable Cable Types and SpecificationsAppendix B CablesRJ-45 Pin Numbering RJ-45 Pin AssignmentsSpecifications