Siemens 2602 manual Is TCP/IP properly configured on your computer?

Page 25

However, if the following message appears, there may be something wrong in your installation procedure:

Pinging 192.168.254.254 with 32 bytes of data:

Request timed out.

2.If the request times out, confirm the following items in sequence:

•Is the Ethernet cable correctly connected between the SpeedStream 2602 and your computer?

The LAN LED on the SpeedStream 2602 and the Link LED of the network card on your computer must be on.

•Is TCP/IP properly configured on your computer?

If the IP address of the SpeedStream 2602 is 192.168.254.254, the IP address of your computer must be from 192.168.254.1 to 192.168.254.253, and the default gateway must be 192.168.254.1.

3.When you can successfully ping the SpeedStream 2602, you are ready to connect to the Internet!

4-4

Image 25

Contents 2602 Table of Contents Appendixes Introduction Features and BenefitsAbout the SpeedStream Applications Package Contents Installing the SpeedstreamDescription of Hardware Description SpeedStream 2602 DSL/Cable RouterInstallation Procedure Hardware InstallationSystem Requirements Before StartingAdapter or to another network device Ports Color Condition Status Reboot the computer when promptedWeb Browser Management Interface Configuring the SpeedstreamNavigating the Management Interface Menu Selections Configuration ChangesMenu Item Description On the Tools menu, click Internet Options View Network and Device StatusGeneral box, select Temporary Internet Files Field DescriptionSet or Change a Password Simple Setup ProceduresConfigure the WAN Connection Set the Time ZoneDynamic IP Address Dhcp Configure LAN Gateway and Dhcp Settings Advanced Setup ProceduresEnable Virtual Server Enable Firewall ProtectionNetwork Address Translation NAT Configure Special ApplicationsConfigure Client Filtering Configure Miscellaneous FeaturesSystem Tools On the Tools menu, click Change PasswordRestore Factory Defaults Reset RouterUpdate Firmware Backup SettingsInstall the TCP/IP Protocol Installing and Configuring TCP/IPClick Start/Settings then click Control Panel Dynamic IP Allocation via a Dhcp Server Configure TCP/IP for the SpeedStreamTCP/IP Verification Manual IP ConfigurationIs TCP/IP properly configured on your computer? Install the Printer Port Monitor Windows 95/98/NT Configuring Printer ServicesConfigure the Print Server Windows 95/98/NTWindows ME WindowsUnix Systems Click to add a Local printer or Network printerTable A-1. Troubleshooting Chart TroubleshootingAppendix a Technical Support Appendix B Cable Types and SpecificationsCables Ethernet CableRJ-45 Pin Numbering RJ-45 Pin AssignmentsSpecifications