SIEMENS 5881 Broadband Internet Router | Chapter 1 Product Specifications |
User’s Guide | Software Specifications |
|
|
Software Specifications
Bridging
•Transparent bridging including Spanning Tree protocol (IEEE 802.1D)
•Bridge filters
Configuration Management
•Easy Setup Web Management Interface
•Microsoft® Windows configuration management via SNMP
•TFTP download/upload of new software and configuration files
•Performance monitor
•Dynamic event and history logging
•Administration through HTTP, SNMP, Telnet or VT100 terminal
•Network boot uses the BootP server (RFC 2131, RFC 2132)
Dial Backup
•Failover to modem on console port
•Web Management Interface
•User selectable fail/restore criteria
•Supports L2TP and IPSec tunnel failover
•Optional modem connector (DB9 or DB25)
Routing
•TCP/IP with RIP1 (RFC 1058), RIP1 compatible and RIP2 (RFC 1389) or static routing on the LAN or WAN
•Novell® IPX with RIP/SAP (RFC 1552)
•DHCP client (RFC 2132)
•DHCP server - Automatic assignment of IP address, mask, default gateway and DNS server addresses to workstations (RFC 2131, 2132)
•DHCP relay agent (RFC 1542)
•DNS relay
•Multiple subnets on LAN
•Virtual routing
•Virtual Router Redundancy Protocol (RFC 2338)
Differentiated Services - Quality of Service provisioning
•Weighted Fair Queuing (WFQ)
•Differentiated Services (DiffServ)
IP Address Translation | PPP (RFC 1661) |
• Network renumbering (RFC 1631) | • PPP over Ethernet (RFC 2516) |
•Network Address Translation (NAT/PAT)
•LAN servers supported with NAT
•Support for NAT inside an IPSec tunnel
SIEMENS | 4 |