SIEMENS 5881 Broadband Internet Router | Chapter 6 Security Setup |
User’s Guide | NAT |
|
|
Configure Host Mapping
To configure the mapping between private IP addresses and public IP addresses:
1. Click NAT Host Mapping on the left navigation pane. This displays the NAT Host Settings page.
2.Select the interface you want to configure from the Interface
3.In Beginning LAN IP, enter the first private IP address you want to map to a public address.
4.In Ending LAN IP, enter the last private IP address you want to map to a public address.
5.In Beginning WAN IP, enter the first public IP address you want to map to a private IP address. It is only necessary to specify a starting IP address. The rest of the addresses in the range are computed automatically.
6.Click Add. This adds the entry to the Current Host Mapping Entries table.
SIEMENS | 51 |