Radio Shack Okidata C6100 manual Replace the Fuser

Page 19

11.Use the provided LED lens cleaner. Gently wipe the LED.

12.Close and latch the top cover.

Replace the Fuser

WARNING!

If the printer has been powered on, the fuser is HOT. This area is clearly labeled. Do not touch it. Handle the fuser with extreme care. Hold it only by its handle, which is only mildly warm to the touch.

If in doubt, switch the printer off. Wait at least 10 minutes for the fuser to cool before opening the printer cover.

1.Press the cover release and open the top cover.

Image 19

Contents Okidata C6100 Setup & User Guide Table of Contents Unpack / Prepare Printer Remove orange piece Print Demo Install Handy Reference GuideDisconnect Current Printer If one exists Windows Network SetupConnect New Printer / Load Software Click Install Driver Page Page Page Check Toner Life Print Only in Black and WhiteReplace a Toner Cartridge Page Page Replace an Image Drum Page Page Page Replace the Fuser Page Check Current Printer Settings Service and Support Reset Factory Default SettingsOKI Printer Supplies Diagram Front View Diagram Rear View