•Reinstall the black drum/toner unit.
•Repeat these steps for all remaining drum/toner units.
Important! If TONER SENSOR ERROR appears when you turn on the printer, the lever for the toner cartridge color indicated is not pushed all the way back.
6. Follow the steps below to prepare the fuser:
remove orange piece
•Press firmly on the blue lock (1) to release the orange transport restraint (2). Pull the restraint out by moving it left and then pulling up. This piece looks as though it is a permanent part of the printer, but is not.
•After the orange restraint piece has been removed, take out the orange band and close the top cover.
•All orange pieces should be thrown away.
•Lock the fuser into place by pushing the lever toward the back of the printer.
7. Follow the instructions below to load the paper tray:
•Pull out the paper tray (A).
•Carefully pull the shipping restraint down, and out (B).
Important! Be sure you remove the entire piece, including both arms.
•Use both hands to pull the front cover down and flip the paper tray out. Remove the pieces of tape and sheet.
3