Radio Shack 61-2234 instruction

Cat. No. 61-2234

Electronic Equipment Surge Protector

•Detects and protects against a power surge of up to 6,000 Volts and 39,500 Amps in 1 nanosecond (1 billionth of a second).

•Protects connected equipment from surges of up to 550 Joules.

•Lets you plug up to six devices into your surge protector.

•Has coaxial connectors for protection against surges through cable TV or antenna cables.

WARNING: To reduce the risk of fire or shock hazard, do not ex- pose this product to rain or moisture.

CAUTION	!
RISK OF ELECTRIC SHOCK. DO NOT
OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE- ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

This symbol is intended to alert you to the pres- ence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.

This symbol is intended to inform you that impor- tant operating and maintenance instructions are

!included in the literature accompanying this product.

Cautions:

•This surge protector is not a lightning arrestor and might not protect against lightning-induced voltage surges.

•Be sure the combined wattage of all connected devices does not exceed 1,800 watts.

•Use the surge protector only with a three-prong stan- dard AC outlet or a grounded two-to-three prong adapter. The surge protector cannot provide protec- tion without a grounded AC source.

•The equipment you plug into the surge protector must have the same voltage and frequency ratings as in “Specifications.”

Protect your valuable components from damage caused by sudden increases in electrical power inside or outside your home, caused by air conditioners, refrigerators, and other large appliances switching on and off. Your surge protector absorbs these spikes and surges. It also im- proves the performance of connected components by fil- tering electromagnetic and radio frequency interference.

Plug the surge protector’s three-prong plug into a nearby dual AC outlet. Then plug your equipment’s AC plug into one of the surge protector’s six outlets.

When your surge protector’s Protected When Lit light is lit, your surge protector absorbs surges and spikes within the limits of it specifications. If a strong surge or spike damages connected equipment while the indicator is lit, refer to the “RadioShack Limited Warranty and Connect- ed Equipment Guarantee” for claim conditions and proce- dures.

Important: A surge or spike beyond the specified limits might overload the protection circuitry and render it inac- tive. If this happens, the surge protector should absorb enough of the surge to protect the connected equipment, but it will not protect against future surges and spikes. If this happens and the Protected When Lit light goes out, replace the surge protector.

RadioShack is a registered trademark used by Tandy Corporation.