RP5030 EN (B ver) 15/11/06 10:28 AM Page 11
Setting the Time
Year/Date/12/24/Time Setting
With this function, you can always read on the display the recording date and time of your recorded messages. Follow the steps below for time setting.
You can still use this unit for normal recording without setting the time. However, no correct recording date and time can be referred for your recorded messages.
1.Turn on the unit.
2.Press MENU repeatedly to enter Time setting mode.
3.When “YEAR” flashes, the digits of the year blinks (default is 2006). Press REVERSE or FORWARD to increase/decrease the number, press MENU to confirm.
4.Once the year is
entered , the digits in the month field will blink (default is
1). Press REVERSE or FORWARD to increase/decrease the number, press MENU to confirm.
5. Once the month is |
|
entered, the digits |
|
in the day will | MM DD |
| |
blink(while the |
|
digits in the month |
|
field stop blinking). |
|
Press REVERSE or
FORWARD to increase/decrease the number, press MENU to confirm.
6.Once the date is entered, you can choose between 12/24 hour clock
display by pressing REVERSE | EN |
/FORWARD, then press MENU to |
|
confirm. |
|
7. Once the time |
|
format is entered, | AM |
the digits in the hour field will blink (default setting is 12 (12 hour mode) & 0
(24 hour mode). Press REVERSE or FORWARD to increase/decrease the number, press MENU to confirm.
8. Once the hour field
is entered, the digits |
|
in the minute field | AM |
will blink. Press REVERSE or FORWARD to increase/decrease the number, press MENU to confirm.
Tip:
Press STOP to exit to Stop mode.
6