RP5030 EN (B ver) 15/11/06 10:28 AM Page 22
Troubleshooting Tips
Unit doesn’t turn on
•Check that batteries are properly
EN inserted and not exhausted.
•Make sure battery compartment door is properly closed.
•Make sure LOCK function is not activated.
Display keeps flashing when unit is off
•You may not have set the time. Refer to section on Time Setting.
Cannot record
•Make sure LOCK function is not activated.
•Make sure memory is not full.
•You have recorded 99 files in one folder. Try record in a new folder.
Cannot show recording date and time during playback
•You may have not set the date and time before recording. Refer to section ‘Time Setting’.
No sound from speaker during playback
•Make sure volume is not set to 0.
•Headphones should not be connected.
Cannot edit
•Make sure LOCK function is not activated.
Cannot activate the unit after pressing on keys
•There may be software problems. Remove the batteries to reset the unit.
Recordable time becomes shorter
•You may have set the recording quality to ‘High Quality’, refer to section ‘Setting Recording Quality’.
Cannot perform playback
•Make sure you have selected folder with recorded messages.
•Make sure LOCK function is not activated.
Cannot erase recorded file(s)
•Make sure you follow each step under section “Erasing Selected File” carefully.
Cannot stop recording when AVR ON
•If AVR ON sensitivity is too high (e.g. 8 - 10), recording may not be stopped in noisy environment.
Cannot keep the saved setting
•If the batteries are removed, saved settings may be removed.
17