Belkin F5U273 manual Video Ports VGA or DVI, How do I disconnect the Docking Station?

Installation

Video Ports (VGA or DVI)

Connect a VGA cable (sold separately) to the VGA video-output port on the Docking Station and to an external monitor. If you have a DVI-capable monitor, you will get better performance by connecting a DVI cable to the DVI video- output port on the Docking Station and to the

external monitor.

NOTE: Use this cable instead of the VGA cable and NOT in addition to it.

Either cable can be connected and disconnected at any time without unplugging the Docking Station from the ExpressCard slot on your notebook. The Docking Station supports all analog CRT and LCD monitors.

How do I disconnect the Docking Station?

1.lf the Docking Station is transferring data through one of its connections, wait until the data has finished transferring.

2.If you are watching a DVD or other streaming video, please stop it before disconnecting.

3.If you are connected using the Ethernet port, close your network connection.

4.Disconnect the ExpressCard cable and/or remove the ExpressCard from the notebook computer.

You can disconnect the Docking Station while the computer is running. However, DO NOT reconnect the Docking Station while the notebook is running. In most notebook computers this will function correctly, but in a few it will cause a system error that could require you to reset your computer.

1

2

3

4

5

6

9