Installing the I/F Interface | Clarion NK1U specification

Installing the I/F (Interface)

BOX

Note:

•Install the I/F BOX in a cool location, as far away as possible from magnetic items.

•Do not stack the I/F BOX with other units. Heat and other influences can create the risk of I/F BOX malfunction.

Installing

1.Affix male hook-and-loop fasteners to the bottom of the I/F BOX and female hook-and- loop fasteners to the installation location in the vehicle.

2.Affix the male and female hook-and-loop fasteners so they align with each other and secure the I/F BOX in place.

Note:

Use a dry cloth to wipe the hook-and-loop fastener installation locations free of dust and oil.

I/F BOX

1 Hook-and-loop fasteners (male)

2Hook-and-loop fasteners (female)

Installing the RDS-TMC Antenna

WARNING

•Run cables to avoid any hindrance of the driver's view.

•Secure cords with tape or by other means to ensure they do not interfere with driver operations.

Installing

1.Determine the attaching position of the RDS- TMC antenna.

Note:

•Please set up the RDS-TMC antenna to become the best reception.

•Keep the RDS-TMC antenna cord fairly straight (not curled or bent) for best reception.

•Attach the RDS-TMC antenna in an area within 15 mm to 25 mm (0.59" to 0.98" ) from the front pillar where it does not interfere with vehicle operation.

•For installation location of the antenna, follow the local rules and regulations.

2.Use the cord holders to secure the antenna cable.

7 Cord holders

Front window	6 RDS-TMC
	antenna

Note:

•Use a dry cloth to wipe the installation location free of dust and oil.

•It takes about 24 hours for the adhesive tape to achieve full adhesion.

3.Connect the RDS-TMS antenna to the RDS- TMC input terminal on the Car Dock (see Wire Connection (P. 8).).

English

NK1U 7