Toshiba Comprehensive Guide to the T1 Network Card Features and Functions

U111, yip to 32 T1 fT t Ss

Handy Programmer (HP911A)

Same Tim fjnctic"R are r t d with jsing ine HP9'.'.A .

The HP911A is a hand-held graphic programmer . ӝts portability makes it ideal for maintenance use at remote locations . The HP911 A has all the features of a ful! size programming terminal . (2 m cable for T1 is included}

•Ladder logic programming of T-Series programmable controllers Ti /T1 S, T2fT2EfT2N and T3,

•Built-in EEPROM allows program copy between T-Series controllers-

•Two display modes,

-Normal: 5 lines and 12 columns

-Zoom, Full device description

•Data monitor for 110 and internal registers .

•On-line programming & EEPROM write . (T1S)

a On-line data set & 110 force-

- Backlit LCD display for better operation in dim light.

Pr gran Storage Module (RM11 )

The RM102 is an external memory device, which n store a Tӝ /T1 S program . By using the HM102, prrgrarn transfer from a master Ti/Ti S can be easily done without the need for a computer or hand held programmer . Two- button operation makes program load ing/savirg accessible to anyone . However, if a password is used in the Ti /T1 S, the password in the RM102 must match before a program load is executed,

Multi-drop Adapter ( U111)

The U111 is an RS-23201RS-4 85 converter dedicati :J to the T1 Series . By using the

can be connected to a master computer or higher level controller via an RS-485 link . The master computer can run a S ADA, MM! or DDE Server program_ The T-PDS Programming software can also be used through the RS- 485 link to program or monitor each individual Ti Ti S . (T1 version 1 .20 or later is required for connecting the T-PDS programming software)

13