TOS-SN-1
Connect the Extended Panel to the inverter according to the procedure mentioned below.
1.Wait 10 minutes after the S11 is turned off to insure the drive is denergized. The charge lamp can be used as a secondary indicator to determine if the drive is still charged.
2.Connect the communication connectors of the extended panel to the inverter (CN1), which has the common serial option (communication) connector, with the optional cable.
3.Insure a secure connection is made between the inverter and the extended panel once the connection is made.
4.Power on the inverter after connection has been made, and the display should turn on.
Note: Before removing the cable, insure step 1 is confirmed.
Programming
| Parameter |
|
| Description |
| Default Value |
|
| New Value |
|
| cmod |
| Command mode selection | 1 | 1 |
| ||||
|
| Operational Panel |
|
| Operational Panel |
| ||||
|
|
|
|
|
|
|
|
| ||
| fmod |
|
| Frequency setting mode selection 1 |
| 0 |
| 3 |
| |
|
|
|
|
|
|
| Operational Panel |
| ||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
ΓFor additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800)