Philips FW-V720 manual Rear Connections, Antennas Connection, Power, AM Antenna, FM Antenna

VOLTAGE

SELECTOR

110V-

127V

220V-

240V

	Preparations
En			Television
gl	AM loop
is	antenna						FM wire
h
							antenna
						L
						AUDIO
						OUT
	right					R	left
	surround				VIDEO		surround
					IN
			VIDEO OUT	D
			(CVBS)
	speaker		B				speaker
	(right)	AUX/			REAR SURROUND C		(left)
		CDRIN
	E		AM ANTENNA	FM ANTENNA
					+ R	– – L +
		SUBWOOFER
		OUT
						AC
						MAINS
		+	C
		R					A
		–				VOLTAGE
		–				SELECTOR
		L				110V-
						127V
		+				220V-
						240V
		SPEAKERS 6Ω
							AC power cord
	Rear Connections				B Antennas Connection

The type plate is located at the rear of the system.

APower

Connect the supplied AM loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.

AM Antenna

Before connecting the AC power cord to the wall outlet, ensure that the following are done;

– If your system is equipped with a Voltage Selector, set the VOLTAGE SELECTOR to the local power line voltage.

– All other connections have been made.

WARNING!

–For optimal performance, use only the original power cable.

–Never make or change any connections with the power switched on.

To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions).

●Position the antenna as far as possible from a TV, VCR or other radiation source.

FM Antenna

●For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA terminal.

8

pg 001-032/V720/21-Eng 8 6/5/01, 6:40 PM 3139 115 20912