Toshiba EO1-33015 owner manual DIP Switch Functions B-672 only, Dip Sw

4. DIP SWITCH FUNCTIONS

EO1-33015

4. DIP SWITCH FUNCTIONS

4. DIP SWITCH FUNCTIONS (B-672 only)

The DIP switches are located to the right of the Guide Wheel.

WARNING! DIPSW 2

		OPEN
Turn the POWER OFF before		1
		2
switching the functions.		3
		4
		5
	Guide Wheel	6
		7
		8
		DIPSW 1

										OPEN
										1
										2
										3
										4
(1)	DIP SW 2									5
										6
										7
										8
		No.	ON/OFF			FUNCTION
		1	1	2
			OFF	OFF	2400 BPS				Fig. 4-1
			ON	OFF	4800 BPS			Transmission speed
		2	OFF	ON	9600 BPS
			ON	ON	19200 BPS
		3	OFF		1 bit			Stop bit length
			ON		2 bits
		4	OFF		7 bits			Data length
			ON		8 bits
		5	OFF		Without			Parity check
			ON		With
		6	OFF		EVEN			Parity check (effective when DIP
			ON		ODD			SW #5 is set to ON.)
			7	8
			OFF	OFF	XON/XOFF (No XON is output at the power on time.)
		7				(No XOFF is output at the power off time.)
					READY/BUSY (DTA)
					(No XON is output at the power on time.)
			ON	OFF	(No XOFF is output at the power off time.)
					READY/BUSY (RTS)
								Data protocol
					(No XON is output at the power on time.)
					(No OFF is output at the power off time.)
					XON/XOFF+READY/BUSY
		8	OFF	ON	(XON is output at the power on time.)
					(XOFF is output at the power off time.)
			ON	ON	XON/XOFF (XON is output at the power on time.)
						(XOFF is output at the power off time.)
(2)	DIP SW 1
		No.		ON/OFF		FUNCTION
		1		OFF		Must be set to OFF
				ON
		2	2	3	4
			OFF	OFF	OFF	English
			ON	OFF	OFF	German
			OFF	ON	OFF	French	Language to display LCD error
		3	ON	ON	OFF	Dutch
							message
			OFF	OFF	ON	Spanish
			ON	OFF	ON	Japanese
		4	OFF	ON	ON	Italian
			ON	ON	ON	Not used
		5		OFF		Without	Auto media feed after a cut issue
				ON		With	(See page 8-4)
		6		OFF		Must be set to OFF
				ON
		7		OFF		Fixed type	Media sensor selection
				ON		Movable type
		8		OFF		Must be set to OFF
				ON

NOTES: The Shaded settings are the factory default settings. "OFF" means "OPEN".

4-1