Toshiba EO1-33015 owner manual Loading the Media, Do not Move the Media Guides using the screw

8. LOADING THE MEDIA

EO1-33015

8. LOADING THE MEDIA

8. LOADING THE MEDIA

WARNING!

1. Do not touch moving parts. To reduce the risk that fingers, jewelry, clothing, etc., be drawn into the moving parts, push the switch in the “OFF” position to stop movement.

2.To avoid injury, be careful not to catch or jam your fingers while opening or closing the cover.

1.Install the holder stand on the rear of the printer.

2.Loosen the screw and slide the media guides outside.

Media Guides

Holder Stand

Release Lock

Screw Fig. 8-1

CAUTION:

DO NOT MOVE the Media Guides using the screw .

3.Lock the Media Holder securely with the Lock Lever.

4.Pass the Holder Shaft through the Media, then set one of the Media Holders and lock it securely with the Lock Lever.

Media Holder

Media Holder

Holder Shaft

Holder Shaft

Media Lock Lever Fig. 8-2

Lock Lever

8-1