Toshiba EM1-33033E owner manual Auto Ribbon Saving Mode

Page 26

10. GENERAL MAINTENANCE

EM1-33033

10.4 Threshold Setting

■Threshold setting procedure (For firmware version 2.5 or earlier)

1Turn the power on.

2Load the pre-printed label. (Any position)

3 Press the [PAUSE] key once.

4 Hold down the [PAUSE] key for more than 3 seconds and it will begin to feed. After it has fed the 2 label, release the [PAUSE] key.

5 Press the [RESTART] key for ON LINE mode.

6 Threshold setting is now completed.

NOTES: 1. If the [PAUSE] key is not held down for more than 3 seconds in PAUSE mode the threshold will not be set.

2.If the [PAUSE] key is released before 2 labels have been issued the setting may not be correct and will have to be re-set.

10.5Auto Ribbon Saving Mode

Auto ribbon saving function is activated when it is selected by DIP switch (Refer to page 4-1) and no print area extends more than 20 mm.

NOTE: According to the relation between the outer diameter of rewound ribbon and print speed, ribbon loss per saving varies as follows:

Print speed

Ribbon loss

3"/sec.

Approx. 6 mm

6"/sec.

Approx. 10 mm

 

 

 

 

10"/sec.

Approx. 20 mm

10-5

Page 25 Page 27
Image 26
Page 25 Page 27
Contents QQ Series Energy Star is a U.S. registered mark Safety Summary Precautions Request Regarding MaintenanceTable of Contents Applicable Model AccessoriesIntroduction 7 2 Q QSpecifications PrinterOption Ribbon MediaOperation Panel OverviewFront/Rear View DIP Switch Functions Turn the Power OFF before switching the functionsExpansion I/O Interface 24 pins, Male Installing the PrinterCentronics Interface 36 pins, Male RS-232C InterfaceLoading the Media Groove Ridge Removing the paper holders upper plates from the media guide An easy way to set the black mark sensor position Batch type Strip typeBuilt-in rewinder type Loading the Ribbon Inserting the Optional Flash Memory Card STI-FL/4ACARE/HANDLING of the Media and Ribbon General Maintenance CleaningCovers and Panels Removing Jammed PaperCleaning the Cutter Unit Threshold Setting L I N EAuto Ribbon Saving Mode Troubleshooting Error Message Problem SolutionFlash Write Problem Solution Page

EM1-33033, EM1-33033E specifications

The Toshiba EM1-33033E and EM1-33033 are advanced lithium-ion battery packs designed for various applications, including electric vehicles and renewable energy storage. These models highlight Toshiba's commitment to innovation and performance in energy storage technology.

One of the standout features of the EM1-33033E and EM1-33033 batteries is their robust energy density. With a capacity optimized for long-lasting performance, these batteries can deliver enhanced power output, making them ideal for high-demand applications. This capability enables electric vehicles equipped with these battery packs to achieve higher ranges on a single charge, improving overall efficiency.

Both models are constructed using advanced lithium-ion technology, which helps in maintaining excellent thermal stability and safety. The lithium chemistry employed in these batteries reduces the risk of overheating and ensures more reliable operation under varying environmental conditions. Additionally, the design incorporates a high-quality thermal management system that maintains optimal battery temperatures during charge and discharge cycles.

Another critical characteristic of the Toshiba EM1-33033E and EM1-33033 is their fast charging capability. These battery packs can be charged quickly, reducing downtime and allowing for more flexible use in applications such as fleet management. Users benefit from shorter charging times, which is particularly advantageous in commercial settings where vehicle utilization rates are crucial.

The batteries also support a long lifecycle, thanks to Toshiba's proprietary manufacturing processes. The robust design ensures a high number of charge and discharge cycles, which translates into lower overall replacement costs and increased sustainability. Both models are designed with recyclability in mind, contributing positively to environmental impact considerations.

Moreover, Toshiba has integrated advanced monitoring systems within these battery packs. These systems provide real-time data on battery health, charge status, and performance metrics, allowing users to make informed decisions and optimize usage patterns.

In summary, the Toshiba EM1-33033E and EM1-33033 lithium-ion battery packs stand out due to their high energy density, fast charging capabilities, exceptional thermal stability, and long lifecycle. These features make them suitable for various energy storage applications, illustrating Toshiba's dedication to delivering reliable and efficient energy solutions for the future.
Top Page Image Contents