Toshiba EM1-33033E owner manual Troubleshooting, Error Message Problem Solution

Page 27

11. TROUBLESHOOTING

EM1-33033

11. TROUBLESHOOTING

11. TROUBLESHOOTING

WARNING!

If you cannot solve a problem with the following solutions, do not attempt to repair it yourself. Turn the power off, unplug the printer, then contact your Authorized Service representative for assis- tance.

Error Message

Problem

Solution

 

 

 

PAPER JAM

1. The media is not fitted correctly.

1. Re-fit the media correctly.

****

 

Press the [RESTART] key.

 

2. The media path is jammed and

2. Remove the cause of the jam and

 

does not feed smoothly.

replace the media correctly.

 

 

Press the [RESTART] key.

 

3. The installed media type does not

3. Turn the power off then on again.

 

match the selected sensor.

Select the correct sensor.

 

 

Feed the media.

 

4. The black mark position on the

4. Adjust the sensor position.

 

media does not match the sensor

Press the [RESTART] key.

 

position.

 

 

5. The installed media size is different

5. Turn the power off then on again.

 

from the programmed size.

Set the correct media size.

 

 

Feed the media.

 

6. The feed gap sensor cannot see

6. Set the threshold (see page 10-4).

 

the difference between the print

Else

 

area and the gap.

Turn the power off and call your

 

 

Authorized Service representative.

 

 

 

HEAD OPEN

Feed or printing has been attempted

Lower the print head.

****

while the print head is raised.

Press the [RESTART] key.

 

 

 

NO PAPER

The media has run out.

Load new media.

****

 

Press the [RESTART] key.

 

 

 

NO RIBBON

The ribbon has run out.

Load a new ribbon.

****

 

Press the [RESTART] key.

 

 

 

REWIND FULL

Too much backing paper or media is

Remove the backing paper or media

****

wound on the internal take-up spool.

from the internal take-up spool.

 

 

Then press the [RESTART] key.

 

 

 

EXCESS HEAD

The print head is too hot.

Turn the power off and decrease the

TEMP

 

print head temperature.

 

 

 

RIBBON ERROR

There is a fault with the ribbon sensor.

Turn the power off. Contact your Au-

****

 

thorized Service representative.

 

 

 

11-1

Image 27
Contents QQ Series Energy Star is a U.S. registered mark Safety Summary Request Regarding Maintenance PrecautionsTable of Contents 7 2 Q Q AccessoriesIntroduction Applicable ModelPrinter SpecificationsOption Media RibbonOverview Front/Rear ViewOperation Panel Turn the Power OFF before switching the functions DIP Switch FunctionsRS-232C Interface Installing the PrinterCentronics Interface 36 pins, Male Expansion I/O Interface 24 pins, MaleLoading the Media Groove Ridge Removing the paper holders upper plates from the media guide An easy way to set the black mark sensor position Strip type Batch typeBuilt-in rewinder type Loading the Ribbon STI-FL/4A Inserting the Optional Flash Memory CardCARE/HANDLING of the Media and Ribbon Cleaning General MaintenanceRemoving Jammed Paper Covers and PanelsCleaning the Cutter Unit L I N E Threshold SettingAuto Ribbon Saving Mode Error Message Problem Solution TroubleshootingFlash Write Problem Solution Page

EM1-33033, EM1-33033E specifications

The Toshiba EM1-33033E and EM1-33033 are advanced lithium-ion battery packs designed for various applications, including electric vehicles and renewable energy storage. These models highlight Toshiba's commitment to innovation and performance in energy storage technology.

One of the standout features of the EM1-33033E and EM1-33033 batteries is their robust energy density. With a capacity optimized for long-lasting performance, these batteries can deliver enhanced power output, making them ideal for high-demand applications. This capability enables electric vehicles equipped with these battery packs to achieve higher ranges on a single charge, improving overall efficiency.

Both models are constructed using advanced lithium-ion technology, which helps in maintaining excellent thermal stability and safety. The lithium chemistry employed in these batteries reduces the risk of overheating and ensures more reliable operation under varying environmental conditions. Additionally, the design incorporates a high-quality thermal management system that maintains optimal battery temperatures during charge and discharge cycles.

Another critical characteristic of the Toshiba EM1-33033E and EM1-33033 is their fast charging capability. These battery packs can be charged quickly, reducing downtime and allowing for more flexible use in applications such as fleet management. Users benefit from shorter charging times, which is particularly advantageous in commercial settings where vehicle utilization rates are crucial.

The batteries also support a long lifecycle, thanks to Toshiba's proprietary manufacturing processes. The robust design ensures a high number of charge and discharge cycles, which translates into lower overall replacement costs and increased sustainability. Both models are designed with recyclability in mind, contributing positively to environmental impact considerations.

Moreover, Toshiba has integrated advanced monitoring systems within these battery packs. These systems provide real-time data on battery health, charge status, and performance metrics, allowing users to make informed decisions and optimize usage patterns.

In summary, the Toshiba EM1-33033E and EM1-33033 lithium-ion battery packs stand out due to their high energy density, fast charging capabilities, exceptional thermal stability, and long lifecycle. These features make them suitable for various energy storage applications, illustrating Toshiba's dedication to delivering reliable and efficient energy solutions for the future.