Toshiba EM1-33033E owner manual Groove Ridge

Page 14

6. LOADING THE MEDIA

EM1-33033

6. LOADING THE MEDIA

4.Put the media on the supply shaft.

5.Pass the media around the damper, then pull the media towards the front of the printer.

6.Insert the ridge of the supply holder into the groove of the supply shaft until the media is fixed. Then turn the locking ring clockwise to secure the supply holder. This will centre the media automatically. NOTE: Do not over tighten the locking ring of the supply holder.

 

Groove Ridge

Damper

 

 

 

Projection

 

Supply Holder

 

Media

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supply Shaft

Fig. 6-3

7.Insert the media into the paper holders of the media guide, adjust the media guides to the media width, and tighten the locking screw.

8.Check that the media path through the printer is straight. The media should be centered under the print head.

Media Guide

Media

Supply Holder

 

Media Guide

 

Paper Holder

Paper Holder

Print Head

Locking Screw

Media

Fig. 6-4

NOTE: When using the label rolled with labels facing outside, please remove the upper plates of both paper holders using the following procedure. Failure to do this may cause a paper jam error.

If you have any questions, please contact your nearest TOSHIBA TEC service representative.

6-2

Page 13 Page 15
Image 14
Page 13 Page 15
Contents QQ Series Energy Star is a U.S. registered mark Safety Summary Precautions Request Regarding MaintenanceTable of Contents Applicable Model AccessoriesIntroduction 7 2 Q QSpecifications PrinterOption Ribbon MediaOperation Panel OverviewFront/Rear View DIP Switch Functions Turn the Power OFF before switching the functionsExpansion I/O Interface 24 pins, Male Installing the PrinterCentronics Interface 36 pins, Male RS-232C InterfaceLoading the Media Groove Ridge Removing the paper holders upper plates from the media guide An easy way to set the black mark sensor position Batch type Strip typeBuilt-in rewinder type Loading the Ribbon Inserting the Optional Flash Memory Card STI-FL/4ACARE/HANDLING of the Media and Ribbon General Maintenance CleaningCovers and Panels Removing Jammed PaperCleaning the Cutter Unit Threshold Setting L I N EAuto Ribbon Saving Mode Troubleshooting Error Message Problem SolutionFlash Write Problem Solution Page

EM1-33033, EM1-33033E specifications

The Toshiba EM1-33033E and EM1-33033 are advanced lithium-ion battery packs designed for various applications, including electric vehicles and renewable energy storage. These models highlight Toshiba's commitment to innovation and performance in energy storage technology.

One of the standout features of the EM1-33033E and EM1-33033 batteries is their robust energy density. With a capacity optimized for long-lasting performance, these batteries can deliver enhanced power output, making them ideal for high-demand applications. This capability enables electric vehicles equipped with these battery packs to achieve higher ranges on a single charge, improving overall efficiency.

Both models are constructed using advanced lithium-ion technology, which helps in maintaining excellent thermal stability and safety. The lithium chemistry employed in these batteries reduces the risk of overheating and ensures more reliable operation under varying environmental conditions. Additionally, the design incorporates a high-quality thermal management system that maintains optimal battery temperatures during charge and discharge cycles.

Another critical characteristic of the Toshiba EM1-33033E and EM1-33033 is their fast charging capability. These battery packs can be charged quickly, reducing downtime and allowing for more flexible use in applications such as fleet management. Users benefit from shorter charging times, which is particularly advantageous in commercial settings where vehicle utilization rates are crucial.

The batteries also support a long lifecycle, thanks to Toshiba's proprietary manufacturing processes. The robust design ensures a high number of charge and discharge cycles, which translates into lower overall replacement costs and increased sustainability. Both models are designed with recyclability in mind, contributing positively to environmental impact considerations.

Moreover, Toshiba has integrated advanced monitoring systems within these battery packs. These systems provide real-time data on battery health, charge status, and performance metrics, allowing users to make informed decisions and optimize usage patterns.

In summary, the Toshiba EM1-33033E and EM1-33033 lithium-ion battery packs stand out due to their high energy density, fast charging capabilities, exceptional thermal stability, and long lifecycle. These features make them suitable for various energy storage applications, illustrating Toshiba's dedication to delivering reliable and efficient energy solutions for the future.
Top Page Image Contents