Others
(Continued)
Image does not appear when using the document imaging camera.
•The wrong input is selected.
→Select the correct input source. 37
Image is out of focus or not clear when using the document imaging camera.
•The camera lens is dirty.
→Clean the camera lens.
Use a lens cleaner to clean the lens. 41
•The document imaging camera is out of focus.
→Focus the document imaging camera.
38
•Focus between main unit and screen is not correct.
→Focus the picture by turning the focusing ring. 21
•The light is not on.
The image may not be projected clearly if the light is not on.
→Turn on the light. 37
The remote control does not work.
•The remote control is not facing the remote sensor.
→Face the remote control transmitter
toward the remote sensor on the projector. 15
•The remote control is too far.
→Operate within about 5 meters. 15
•There is an obstruction between the remote control and the remote sensor.
→Remove the obstacle.
•The batteries are exhausted.
→Replace the batteries. 14
•The operating mode of the remote control is not set correctly.
→Set the POINTER/PJ selector
according to the equipment you want to control. 13
CONTENTS | 44 |