Toshiba TLP451 Specifications, Liquid crystal display, Projection lens, Document imaging camera

Page 51

Others

CONTENTS

51

Specifications

Main unit

Power requirements

AC 100 – 240V 50/60Hz

Power consumption

TLP450U : 220W

TLP451U : 235W

TLP650U : 220W

TLP651U : 235W

Mass	TLP450U : 3.7 Kg
	TLP451U : 4.5 Kg
	TLP650U : 3.7 Kg
	TLP651U : 4.5 Kg

Dimensions

TLP450U/650U :

318 x 87 x 232 (mm) (W/H/D) (Including the projecting sections)

TLP451U/651U :

318 x 87 x 288 (mm) (W/H/D) (Including the projecting sections)

Ambient environment

Temperature : 0°C to 35°C

Humidity : 30% to 70% RH

Lamp	UHP lamp 150W
Speaker	1W (monaural)

RGB INPUT

RGB signal : (D-sub 15-pin)

Audio: 1V(p-p), more than 22kΩ, ø3.5mm stereo mini jack

VIDEO INPUT

S-video signal : Mini DIN 4-pin

Video signal : 1V(p-p), 75Ω

Audio : 1V(p-p), more than 22kΩ, RCA pin jack

MONITOR OUTPUT

RGB signal : D-sub 15-pin

Audio : 1V(p-p), less than 2.2kΩ, ø3.5mm stereo mini jack

CONTROL terminal

Mini DIN 8-pin (RS-232C)

Cabinet Material

ABS resin

Liquid crystal display

Projection system

3-pannels transmission

Panel size

0.9 inches

Driving system

TFT active matrix

Picture elements

TLP450U/451U : 480,000 pixels (800 x 600 dots) x 3 TLP650U/651U : 786,432 pixels (1024 x 768 dots) x 3

Projection lens

Lens	Zooming lens F = 1.8 – 2.1
	f = 36 – 47mm
Focusing	Manual operation
Zooming	Manual operation

Document imaging camera

Lens	F = 1.8 – 2.3, f = 5.8 – 23.2mm
Focus	Manual operation
Iris	Auto/Level adjustment allowed

Image element

1/3 inch CCD

Total picture elements 810,000 pixels

Resolution Horizontal 1024, vertical 768

Lighting LED light

(Continued)

Image 51

Contents TLP450U TLP451U TLP650U TLP651U Safety Precautions Save Original Packing Materials Important PrecautionsPower Sources Source of LightVentilation Water and Moisture Power-Cord Protection Heat Cleaning OverloadingStack Inhibited AccessoriesObject and Liquid Entry Do not place the product verticallyReplacement Parts Damage Requiring Service ServicingDo not move the projector while the arm is still erect Do not carry by the camera armPower supply cord selection Before use ContentsMain unit Part names and functionsTo connect a computer to control the projector RGB Input connectors RGB input, Audio inputLeft side Right side Rear sidePOINTER/PJ selector Remote controlAuto SET button 10 2 Keystone buttonInstalling batteries Remote control operation Connecting an IBM PC or compatible computer DOS/V Connecting a Macintosh computerConnections Output terminals Connecting video equipmentPreparation Projector placementTake off the lens cover Connect the power cordTurn the foot adjuster to make fine adjustment of the height How to use the foot adjusterPicture projection Press Keystone Turning the power offPress ON/STANDBY after using the projector Correcting the keystone distortionDisplaying the input source Information Adjusting the image automaticallyFreezing the picture Cutting off the picture and sound TemporarilyPress Resize Changing the picture sizeConnecting the Remote Mouse Receiver Operating the computer By the remote controlTo left-click Operating the computer by Remote controlTo drag and drop To move the pointerAudio33 Settings and adjustments on MenuKeystone30 Image31Initial settings Default Menu disappears Press MenuPress Enter Keystone correctionPress Menu to display the menu To select Press to select Auto setMenu Press or to select Projection adjustments ImagePress or to select a preferred item To adjust Press Menu to displayPress To select a Preferred item Picture adjustmentsSound adjustments Audio Press To select a Preferred item To adjustMenu Press To select Press Enter Press Menu Saving data SavePart names and functions Document imaging camera Preparation of the document imaging Camera Turn the armPull up the light Picture projection with Document imaging camera Arm Mode of the documentWhen finished, turn off Press PHOTO/TEXT to selectPrepare a white paper to write on Press Overlay Project the paper using the cameraOverlaying projection Write on the paper with a blue or red penLamp Temp Trouble indicationsReplacing the intake, exhaust fans Air filter Air filter, lens and main unit CleaningCleaning the lens Cleaning the main unit Cleaning the air filterLoad a new lamp Lamp replacementReset the lamp timer Pull out the lampBefore calling service Personnel Others Mode determination and signal system Input SignalXGA60 Signal assignment Input SignalPin arrangements Timing chart RGB signal defaultsInterface format Adjustments with RS-232COthers Document imaging camera SpecificationsLiquid crystal display Projection lensAccessories Your Responsibility Limited two 2 Years Warranty of Parts and LaborStep-by-step procedure how to obtain warranty service Toshiba TLP600/400 Series 3LCD Data ProjectorOthers

Related manuals

Manual 106 pages 10.53 Kb

Manual 316 pages 26.3 Kb