Toshiba TDP-TW95, TDP-TW100 owner manual Computer settings

Page 27

Setting up the wireless LAN (Continued)

<DHCP>

If you set DHCP to Use, the IP address of the projector is assigned automatically by the DHCP server. If your network environment does not assign IP addresses automatically, set DHCP to Not use, then set the following items IP address, Subnet mask and Gateway manually.

<IP address>

When DHCP is set to Not use, consult with your network administrator for the settings below and set the IP address manually.

An IP address is a unique number assigned to a terminal. The format is a string of four dot-separated three-digit numbers. (Example: 111.112.xxx.xxx)

<Subnet mask>

A subnet mask is used to determine what subnet the IP address assigned to a terminal belongs to. (Example: 255.255.xxx.xxx)

<Gateway>

This value specifies the device, such as a router, to be used to access servers outside the network. It is identified by the IP address. (Example: 111.112.xxx.xxx)

•[Setting initialization]

This item resets the wireless LAN settings to their factory defaults.

•[Projector name]

This can be used to identify projectors when communicating with multiple projectors, or if there is a possibility that another person who is out of communication range will be using the same projector. It is recommended this is set to prevent wrong transmission.

•[WEB browser]

<Browser authentication>

Browser authentication and Password are factory-set to Off and no string, respec- tively. You should set them as soon as possible.

<Password>

If you have forgotten your password, set it again using the menu on the main unit.

■Computer settings

Refer to instruction manuals of your computer or wireless LAN adapter to perform the following settings.

•Select Ad hoc (for some wireless LAN adapters, this is Peer-to-Peer Group).

•[Channel] : You may need to set channels depending on the wireless LAN adapter being used. Make the [Channel] settings identical to the computer settings.

•Set SSID (for some types of wireless LAN adapter, use Network name instead) as the same as projector’s SSID (at factory shipment, this is set to TDPJ).

•If Encryption, Network authentication, Key index and WEP key are set on the projector, set to the same values.

Note

•The Easy Connect utility p.68 allows users to easily connect the projector to a computer over wireless networks, without making network setting. For Easy Connect support, the computer requires a wireless LAN environment that is NDIS5.1 compliant.

Refer to the user’s manual supplied with the wireless LAN adapter or the wireless LAN embedded computer for more information.

Operations

52

53

Page 26 Page 28
Image 27
Page 26 Page 28
Contents TDP-TW95 TDP-TW100 Safety Precautions Heat Power-Cord ProtectionOverloading Power Sources CleaningImportant Safety Instructions Place and Manner of Installation Save Original Packing MaterialsMoisture Condensation Disposal Important Precautions Avoid Volatile LiquidWireless LAN USB Adapter CopyrightsContents Names of each part on the main unit Checking the package contentsName Main Function Name Main Function Zoom button Adjusts the screen sizeInside the battery cover Label locationsReplace the battery cover Loading dry-cell batteries into the remote controlOperating the remote control Remove the battery cover Insert the dry-cell batteriesOperating a computer PlacementConnecting a computer Placement StylesBefore connection ConnectionTurning the power on and off Turning the power onPress the ON/STANDBY button again Basic operations Using handy features Easy setupCorrecting the keystone distortion Cutting off the picture and sound temporarily Mute Using handy featuresChanging picture mode Resizing imageFreezing the image Freeze Changing screen sizeCancel Using the menusHow to use the menus Password cancel confirmation screen is displayed. OK orImage adjustment menu Using the menusDisplay setting menu Logo confirmation Default setting menuReset logo Display styleLamp power Wireless standbyRemote control Power on Easy setupDisplaying Information Status display How to use the USB terminalConnecting USB device Disconnecting USB deviceSetting up the wireless LAN Communication modeFunctions Projector settings Be sure to read this subsection Setting up the wireless LANSetup using the Setting display Setting Wireless UtilityDetails on individual items Character entryComputer settings Jpeg files Setting slideshow optionsUSB memories Backing up dataPlaying a slide show from a thumbnail list Symbols in the thumbnail listChanging slides Plug a USB memorySearching for a target file Displaying slidesStatus display Control settingControl setting menu Checking the projector statusUsing the Wireless Utility Installing the applicationsUsing the Wireless Utility Select the projector to transmit Wireless Utility’s Select file fieldClick on the icon Click on the Browse button Select the file to sendEasy Connect utility Play the video file via the Control windowUnplug the USB memory from the computer How to connect USB memoryCopying the computer settings to the projector Setting information is saved to the USB memoryControl button Click on the Remote Control window’s buttonsTo quit, click on the button on the Remote Control Window Click on the RemoteConverting an image file How to use the Jpeg Conversion ToolConverting files created with Microsoft PowerPoint Launching the Jpeg Conversion ToolConversion Method field, select Creating screen capture How to use the Jpeg Conversion ToolHow to use the Projector Configuration Tool Making a presentation with converted Jpeg filesAbout lamp Select items from the menu on the leftDetails on major items Lamp replacement Trouble indications Lens and main unit cleaningLens cleaning Main unit cleaningBefore calling service personnel Specification SpecificationsList of general specifications List of supported signals RGB signalsSpecifications List of supported signals Y/PB/PR signalsList of supported signals Video, S-Video signals
Related manuals
Manual 46 pages 59.69 Kb
Top Page Image Contents