Installing the applications

If you will use the wireless LAN USB adapter function, install the application on the supplied CD-ROM onto your computer.

■System Requirements

Supported OS:	Windows® 2000, Windows® XP (Windows® 98SE and
	Windows® ME are supported by JPEG Conversion Tool.)
CPU:	Pentium M 1 GHz or higher recommended
RAM:	256 MB or more recommended

Screen area (resolution): 1024 by 768 pixels recommended

*The system requirements may vary depending on the conditions of use.

■Application Types and Major Functions

Wireless Utility

This application is used for wireless connections. Use it to send the images from the computer’s screen to your projector, and display on the screen. In addition, also use it to transmit the sound being played on a computer to the projector.

JPEG Conversion Tool

Use to convert JPEG and other files into a format that can be displayed as a slide show using a USB memory.

■How to install

In the supplied CD-ROM, select the Wireless Utility folder and the JPEG Conversion Tool folder, and run setup.exe, respectively. Follow the instructions on your computer screen.

During the installation, a dialog box may appear with the message “Digital Signature Not Found” and the prompt “Do you want to continue the installation?”. Click on the [Yes (Y)] button to continue the installation.

When installation is finished, the following shortcuts will appear on your computer’s desktop:

Wireless Utility →	Operations p.63
JPEG Conversion Tool →	Operations p.74

■How to uninstall

Select [Start Menu] → [Settings] → [Control Panel] → [Add/Remove Programs], and remove Toshiba Data Projector and JPEG Conversion Tool from currently installed programs.

Notes

•Your computer screen may temporarily go out during installation, but it is not an errors.

•Before beginning installation or uninstallation, you need to log on as Administrator.

Using the Wireless Utility

■ Displaying a computer’s screen via the projector

1 Launch the Wireless Utility software application.

When the Wireless Utility launches, the Screen Image transmission mode window appears on the computer screen.

To switch to the Screen Image transmission mode window from another mode, click on the

Screen Image icon .

2Select Transmission mode.

Click on Update automatically or Update manually. See step 6 for the meanings of

Update automatically and Update manually.

3Click on the Advanced button.

The Screen Image: Advanced Settings dialog appears. Set the dialog as shown below, as necessary.

•Interruption

Check the No Interruptions checkbox to prevent other computers from interrupting the projector, for example, during presentation in the Update automatically mode.

•Window

Select the Place in Tasktray at the start of transmission checkbox to iconify the Wireless Utility and place it in the computer’s tasktray when transmission initiated.

To display the window, double click on this icon, or right click and select Open from the popup menu. Even with the Wireless Utility window minimized, you can use the pop-up menu to stop or resume transmission as described in step 4 and later

•Transmission Mode (Image)

Selecting High quality improves the quality of the projected image, but lowers communication speed. Selecting High speed has the opposite effect.

•Transmission Mode (Sound)

Check the Transmit sound to a projector (Only when connected with only one projector) checkbox to transmit the sound being played on a computer to the projector. Note: The sound can be sent when only one projector is selected.