Toshiba TDP-TW95, TDP-TW100 owner manual Lamp replacement

Page 41

Lamp replacement

A lamp is consumable supplies. If used for extended periods, images will appear dark, and the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp depends on condition of use.) If this happens, replace it with a new one.

WARNING

•If the projector is mounted on the ceiling, it is recommended to use your Toshiba dealer- ship when the lamp has to be exchanged.

Uncovering the lamp while the projector is mounted on a ceiling may lead to a danger of damage from falling pieces of glass if the lamp is broken. Besides, working at high elevations can also be hazardous. Do not attempt to replace the lamp by yourself.

•When replacement is required, be sure to use: TLPLW9 for TDP-TW95 or

TLPLW10 for TDP-TW100 (sold separately).

CAUTION

•If you have been using the projector, the lamp will be very hot, and may cause burn injuries. Wait for the lamp to cool (for longer than 1 hour) before replacing it.

•If the lamp should break, please handle with care to avoid injury due to broken pieces and contact your dealer for repair service.

4Pull out the lamp.

Loosen the three lamp locking screws, pull up the handle, and remove the lamp.

5Mount the new lamp.

Align the orientation, press down the new lamp until the bottom is reached, and lock in place using the three lamp locking screws.

6Replace the lamp cover.

Align the cover, and press it in, then tighten the screws loosened in step 3 until the lamp cover is no longer loose.

4

5

1

2

2

1

1Unplug power cord.

2Wait until lamp is sufficiently cooled.

Wait for at least 1 hour.

7Reset the lamp timer.

See the lamp’s manual for instructions on resetting the lamp timer.

Notes and Precautions

• The Lamp time item in the Status display menu indicates the time of lamp use (as a

3 Remove the lamp cover.

3

Loosen the two screws, raise the lamp cover with your fingers as shown to remove the lamp

1

Lamp cover

rough guide). p.44

 

• It is recommended that the lamp be replaced after 2,000 hours of use. When [Lamp time]

reaches 2,000 hours, the

icon and a message will appear. (After 2,000 hours, they will

appear when the power is on at the first time every 100 hours.) This display disappears

cover. Use care to avoid any damage to nails and/or tip of your finger(s). If you have any difficulty in removal, you can use a screwdriver or any other smaller tool for your convenience.

2

when you press the button.

• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the

projector may fail to be powered on or the lamp may fail to come on.

• Always replace the lamp with a new one.

• The lamp is made out of glass. Do not touch the glass surface with your bare hands,

bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

Used Lamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic mercury. Be careful not to break used lamps, and dispose of them in accordance with local regulations.

Maintenance

80

81

Page 40 Page 42
Image 41
Page 40 Page 42
Contents TDP-TW95 TDP-TW100 Safety Precautions Overloading Power Sources Power-Cord ProtectionCleaning HeatImportant Safety Instructions Moisture Condensation Place and Manner of InstallationSave Original Packing Materials Wireless LAN USB Adapter Important Precautions Avoid Volatile LiquidCopyrights DisposalContents Names of each part on the main unit Checking the package contentsInside the battery cover Name Main Function Zoom button Adjusts the screen sizeLabel locations Name Main FunctionOperating the remote control Loading dry-cell batteries into the remote controlRemove the battery cover Insert the dry-cell batteries Replace the battery coverConnecting a computer PlacementPlacement Styles Operating a computerBefore connection ConnectionPress the ON/STANDBY button again Turning the power on and offTurning the power on Basic operations Correcting the keystone distortion Using handy featuresEasy setup Changing picture mode Using handy featuresResizing image Cutting off the picture and sound temporarily MuteFreezing the image Freeze Changing screen sizeHow to use the menus Using the menusPassword cancel confirmation screen is displayed. OK or CancelImage adjustment menu Using the menusDisplay setting menu Reset logo Default setting menuDisplay style Logo confirmationRemote control Wireless standbyPower on Easy setup Lamp powerConnecting USB device How to use the USB terminalDisconnecting USB device Displaying Information Status displayFunctions Setting up the wireless LANCommunication mode Setup using the Setting display Setting up the wireless LANSetting Wireless Utility Projector settings Be sure to read this subsectionDetails on individual items Character entryComputer settings USB memories Setting slideshow optionsBacking up data Jpeg filesPlaying a slide show from a thumbnail list Symbols in the thumbnail listSearching for a target file Plug a USB memoryDisplaying slides Changing slidesControl setting menu Control settingChecking the projector status Status displayUsing the Wireless Utility Installing the applicationsUsing the Wireless Utility Click on the icon Wireless Utility’s Select file fieldClick on the Browse button Select the file to send Select the projector to transmitEasy Connect utility Play the video file via the Control windowCopying the computer settings to the projector How to connect USB memorySetting information is saved to the USB memory Unplug the USB memory from the computerTo quit, click on the button on the Remote Control Window Click on the Remote Control window’s buttonsClick on the Remote Control buttonConverting files created with Microsoft PowerPoint How to use the Jpeg Conversion ToolLaunching the Jpeg Conversion Tool Converting an image fileHow to use the Projector Configuration Tool How to use the Jpeg Conversion ToolMaking a presentation with converted Jpeg files Conversion Method field, select Creating screen captureDetails on major items About lampSelect items from the menu on the left Lamp replacement Lens cleaning Lens and main unit cleaningMain unit cleaning Trouble indicationsBefore calling service personnel List of general specifications SpecificationsList of supported signals RGB signals SpecificationList of supported signals Video, S-Video signals SpecificationsList of supported signals Y/PB/PR signals
Related manuals
Manual 46 pages 59.69 Kb
Top Page Image Contents