Toshiba TDP-TW95, TDP-TW100 owner manual Using the menus, Image adjustment menu

Using the menus (Continued)

■The image adjustment menu

Use this menu to set or adjust image-related items. Items that can be set or adjusted are marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked, it indicates that you cannot select for the current input.)

	Item		Description		Computer	Y/PB/PR	Video	S-video	Wireless/
									USB
	Contrast	Adjust the image contrast.			Yes	Yes	Yes	Yes	Yes
			Lower	Higher
	Brightness	Adjust the brightness of the image.			Yes	Yes	Yes	Yes	Yes
			Darker	Brighter
	Color	Adjust the color of the image.			No	Yes	Yes	Yes	No
			Lighter	Deeper
	Sharpness	Adjust the sharpness of the image.			No	Yes	Yes	Yes	No
			Softer	Sharper
	Noise	Set the function to reduce screen noise.			No	Yes	Yes	Yes	No
	reduction*1	On (Enable)		Off (Disable)
	Picture mode	Press	. Toggle the picture mode with		No	Yes	Yes	Yes	No
			.
		1/2/3
		1/2/3/4/5			Yes	No	No	No	Yes
/	R-level	Adjust red of the image color.			Yes	Yes	Yes	Yes	Yes
/
		Less red		More red
	G-level	Adjust green of the image color.			Yes	Yes	Yes	Yes	Yes
		Less green		More green
	B-level	Adjust blue of the image color.			Yes	Yes	Yes	Yes	Yes
		Less blue		More blue
	NTSC mode*2	Set the black level with		.	No	No	Yes	Yes	No
		US	: NTSC (US) mode
		JAPAN	: NTSC (JAPAN) mode
	Auto setting	Automatically adjusts items such as the			Yes	No	No	No	No
		samplingphase depending on the type of
		input signal.
	Position	Press	then change mode using		Yes	No	No	No	No
		and adjust with		.
		Phase			Yes	No	No	No	No
		Adjust to eliminate flicker.

Item	Description	Computer	Y/PB/PR	Video S-video		Wireless/
						USB
Position	Frequency	Yes	No	No	No	No
	Adjust to eliminate periodic patterns and
	flickering when many fine vertical lines
	appear on the screen.
	H-position	Yes	No	No	No	No

Adjust the horizontal position of the image.

V-position Yes No No No No

Adjust the vertical position of the image.

Clamp 1	Yes	No	No	No	No
Adjusts the clamp pulse position.
Clamp 2	Yes	No	No	No	No

Adjusts the clamp pulse width.

*1: [Noise reduction] may not work depending on signal type.

*2: [[NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or [NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for other languages.

Operations

36 37