Toshiba TDP-TW100 Detailed description Auto input search, Wireless standby, Remote control

Page 22

Using the menus (Continued)

Detailed description [Auto input search]

[On]: Automatically searches the signals that can be projected, and switches input from the connected device that outputs the video signals each time the INPUT button is pressed. The input from the connected device that outputs no video signals is skipped.

[Off]: Displays the Input select menu.

Toggle with buttons and press button. (The input without signals can be selected.)

Input select menu

Input select

Computer 1

Y/PB/PR 1

Computer 2

Y/PB/PR 2

Video

S-video

Wireless/USB

/ shows whether signal is input or not.

[Wireless standby]

When [Wireless standby] is set to [On], the wireless LAN is switched to the standby state as the projector enters standby. While the wireless LAN is in standby, the projector can be powered on using the remote control function of the Wireless Utility. When [Wireless standby] is set to [Off], the projector cannot be powered on with the remote control function of the Wireless Utility.

[Remote control]

Sets a remote control code from 4 types. You can set each code respectively for up to 4 projectors. The factory setting is [1].

To switch codes, set the same code for the projector and the remote control. A remote control code is applied after the setting is done.

•You cannot operate the remote control if the codes of the projector and the remote control do not match.

[Power on]

Note that if [Power on] is set to [Auto], then if the power is supplied when restored after a power outage, the projector will come on.

[Easy setup]

<Auto keystone>: Switches on/off the automatic keystone distortion correction when the EASY SETUP button is pressed or when Power on Easy setup is set to ON. <Auto-setting>: Switches on/off the auto-setting function when the EASY SETUP button is pressed or when Power on Easy setup is set to ON.

<Power on Easy setup>: Switches on/off the Easy setup operation when the power is turned on.

Note

•The Easy setup automatically switches off when [Ceiling] or [Rear ceiling] is selected for projection mode.

[Lamp power]

When [Lamp power] is set to [Low], the screen becomes a little darker, but the cooling fan noise gets quieter.

[Fan mode]

Setting [Fan mode] to [High] increases the cooling fan speed. (The cooling fan noise gets louder.) Set this option to use the projector, for example, at high altitude (over 1,500 meters above sea level).

• Do not set Fan mode to [High] when using the projector at a lower altitude.

Remote control code setting for remote control

Remove the battery cover and set the same remote control code switch as the projector. p.17 (Use a screwdriver with thin tip to set.)

[Key lock]

Protect from operating errors by locking on the control panel buttons of the projector. (The remote control operations are available.)

Control panel operations are locked after the setting is done, and accordingly operation with the control panel buttons is disabled.

•To release the key lock, set the [Key Lock] to [Off] using remote control. Pressing the [RETURN] button on the projector for 10 seconds also sets the [Key Lock] to [Off]. (In the latter case, the LAMP, TEMP, and FAN indicators light in orange for 3 seconds.)

•When Wireless or USB input is selected, the [Key Lock] cannot be set to [Off] with the [RETURN] button on the projector.

Operations

42

43

Page 21 Page 23
Image 22
Page 21 Page 23
Contents TDP-TW95 TDP-TW100 Safety Precautions Cleaning Power-Cord ProtectionOverloading Power Sources HeatImportant Safety Instructions Save Original Packing Materials Place and Manner of InstallationMoisture Condensation Copyrights Important Precautions Avoid Volatile LiquidWireless LAN USB Adapter DisposalContents Checking the package contents Names of each part on the main unitLabel locations Name Main Function Zoom button Adjusts the screen sizeInside the battery cover Name Main FunctionRemove the battery cover Insert the dry-cell batteries Loading dry-cell batteries Into the remote controlOperating the remote control Replace the battery coverPlacement Styles PlacementConnecting a computer Operating a computerConnection Before connectionTurning the power on Turning the power on and offPress the ON/STANDBY button again Basic operations Easy setup Using handy featuresCorrecting the keystone distortion Resizing image Using handy featuresChanging picture mode Cutting off the picture and sound temporarily MuteChanging screen size Freezing the image FreezePassword cancel confirmation screen is displayed. OK or Using the menusHow to use the menus CancelUsing the menus Image adjustment menuDisplay setting menu Display style Default setting menuReset logo Logo confirmationPower on Easy setup Wireless standbyRemote control Lamp powerDisconnecting USB device How to use the USB terminalConnecting USB device Displaying Information Status displayCommunication mode Setting up the wireless LANFunctions Setting Wireless Utility Setting up the wireless LANSetup using the Setting display Projector settings Be sure to read this subsectionCharacter entry Details on individual itemsComputer settings Backing up data Setting slideshow optionsUSB memories Jpeg filesSymbols in the thumbnail list Playing a slide show from a thumbnail listDisplaying slides Plug a USB memorySearching for a target file Changing slidesChecking the projector status Control settingControl setting menu Status displayInstalling the applications Using the Wireless UtilityUsing the Wireless Utility Click on the Browse button Select the file to send Wireless Utility’s Select file fieldClick on the icon Select the projector to transmitPlay the video file via the Control window Easy Connect utilitySetting information is saved to the USB memory How to connect USB memoryCopying the computer settings to the projector Unplug the USB memory from the computerClick on the Remote Click on the Remote Control window’s buttonsTo quit, click on the button on the Remote Control Window Control buttonLaunching the Jpeg Conversion Tool How to use the Jpeg Conversion ToolConverting files created with Microsoft PowerPoint Converting an image fileMaking a presentation with converted Jpeg files How to use the Jpeg Conversion ToolHow to use the Projector Configuration Tool Conversion Method field, select Creating screen captureSelect items from the menu on the left About lampDetails on major items Lamp replacement Main unit cleaning Lens and main unit cleaningLens cleaning Trouble indicationsBefore calling service personnel List of supported signals RGB signals SpecificationsList of general specifications SpecificationList of supported signals Y/PB/PR signals SpecificationsList of supported signals Video, S-Video signals
Related manuals
Manual 46 pages 22.46 Kb
Top Page Image Contents