Toshiba TDP-TW95, TDP-TW100 Setting up the wireless LAN, Setup using the Setting display

Page 25

Setting up the wireless LAN (Continued)

■Setup using the Setting display (2)

●Projector settings (Be sure to read this subsection.)

Using the factory settings as-is may suffer security damage, so be sure to change the projector settings.

1. Press the MENU button twice The Setting display (2) is displayed.

* Appears only when Wireless/USB input is selected.

2. Select a Category

■Setting Wireless Utility

If you select Wireless Utility, the following items can be set.

Item

 

 

Description

 

Easy Connect [Yes

No] [Enter:

]

 

 

(USB memory)

 

 

 

 

Network settings

Mode: Ad hoc

Infrastructure

 

 

 

 

 

 

 

 

Standards: IEEE802.11b

IEEE802.11g

 

 

 

 

 

 

 

Channel: Select a number (1 to 11) using the

buttons.

Select a category by using .

The following four categories are available:

Wireless utility p.49 setup

Slide Show setup p.55

Displays the current settings of selected category.

Item shown in gray cannot be set with the currently set conditions of the projector.

SSID: Specify a desired character string (1 to 32 characters).

 

[

: Move left or right one character.]

[

to

: Set a character.]

 

 

 

 

 

 

Encryption: On

Off

 

 

 

 

 

 

 

 

 

Network authentication: Open

Shared

 

 

 

 

 

 

Key index: Select a desired number (1 to 4) set by

.

 

 

 

 

 

WEP key: Specify a desired character string.

 

 

 

(5 to 13 characters, or 10 to 26 digits in hexadecimal notation)

[

: Move left or right one character.]

[

to

: Set a character.]

 

 

 

 

 

 

 

DHCP: Use

 

Not use

 

 

 

 

Control setting

p.60

Status display

p.61

3.Make settings Press or to open the menu.

Item

These marks signify the items can be

selected from the list by using . After an item is selected, apply it by

pressing .

The figure shows a typical example. As the display may differ depending on the item, use the following pages as a reference.

While the video file transfer function of wireless utility is in use, the background image of the Setting display (2) does not appear.

4. Back

RETURN button

5. End

Press the MENU button or RETURN button.

 

(The menu disappears 30 seconds after the last operation.)

 

IP address: Enter using the numeric keys of the remote control.

 

 

 

[

: Move left or right one character.]

[

to

: Set a character.]

 

 

 

 

 

Subnet mask: Enter using the numeric keys of the remote control.

 

 

 

[

: Move left or right one character.]

[

to

: Set a character.]

 

 

 

 

 

Gateway: Enter using the numeric keys of the remote control.

 

 

 

[

: Move left or right one character.]

[

to

: Set a character.]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Confirm: [OK]

 

[Cancel]

[Enter:

]

 

 

 

 

 

 

 

 

 

 

 

 

 

Setting

Reset all the network settings.

 

 

 

 

 

 

 

initialization

 

Confirm: [Yes]

 

[No]

[Enter:

]

 

 

 

 

Projector

Specify a desired character string (0 to 8 characters).

 

 

 

 

name

[ or

: Enter setting mode.]

[

: Select item.]

[

: Move left or right one

 

 

character.] [

to

 

: Set a character.]

 

 

 

 

 

 

 

Confirm: [OK]

[Cancel]

[Enter:

]

 

 

 

 

 

 

Remote

Specify whether to allow the remote control of the projector from a computer.

 

control

Allowed

Presentation

Forbidden

 

 

 

 

Allowed:

 

The projector always accepts remote commands from a computer.

 

 

Presentation:

Accepts only the remote commands from the computer whose screen is

 

 

 

 

 

currently displayed via the projector (Update automatically) using Wireless

 

 

 

 

Utility.

 

 

 

 

 

 

 

 

Forbidden:

 

Always ignores any remote commands from a computer.

 

 

 

 

WEB browser

Browser authentication: Switch on/off the password authentication for access to the

 

 

setting screen using the Projector Configuration Tool.

 

On

Off

Password: Enter the password used to access the setting screen when the Browser authentication is set to On. A character string (1 to 8 characters) can be specified as desired.

[: Move left or right one character.][to: Set a character.]

Confirm: [OK] [Cancel] [Enter:]

* To enter characters, use the numeric keypad on the remote control.

Operations

48

49

Page 24 Page 26
Image 25
Page 24 Page 26
Contents TDP-TW95 TDP-TW100 Safety Precautions Overloading Power Sources Power-Cord ProtectionCleaning HeatImportant Safety Instructions Save Original Packing Materials Place and Manner of InstallationMoisture Condensation Wireless LAN USB Adapter Important Precautions Avoid Volatile LiquidCopyrights DisposalContents Names of each part on the main unit Checking the package contentsInside the battery cover Name Main Function Zoom button Adjusts the screen sizeLabel locations Name Main FunctionOperating the remote control Loading dry-cell batteries Into the remote controlRemove the battery cover Insert the dry-cell batteries Replace the battery coverConnecting a computer PlacementPlacement Styles Operating a computerBefore connection ConnectionTurning the power on Turning the power on and offPress the ON/STANDBY button again Basic operations Easy setup Using handy featuresCorrecting the keystone distortion Changing picture mode Using handy featuresResizing image Cutting off the picture and sound temporarily MuteFreezing the image Freeze Changing screen sizeHow to use the menus Using the menusPassword cancel confirmation screen is displayed. OK or CancelImage adjustment menu Using the menusDisplay setting menu Reset logo Default setting menuDisplay style Logo confirmationRemote control Wireless standbyPower on Easy setup Lamp powerConnecting USB device How to use the USB terminalDisconnecting USB device Displaying Information Status displayCommunication mode Setting up the wireless LANFunctions Setup using the Setting display Setting up the wireless LANSetting Wireless Utility Projector settings Be sure to read this subsectionDetails on individual items Character entryComputer settings USB memories Setting slideshow optionsBacking up data Jpeg filesPlaying a slide show from a thumbnail list Symbols in the thumbnail listSearching for a target file Plug a USB memoryDisplaying slides Changing slidesControl setting menu Control settingChecking the projector status Status displayUsing the Wireless Utility Installing the applicationsUsing the Wireless Utility Click on the icon Wireless Utility’s Select file fieldClick on the Browse button Select the file to send Select the projector to transmitEasy Connect utility Play the video file via the Control windowCopying the computer settings to the projector How to connect USB memorySetting information is saved to the USB memory Unplug the USB memory from the computerTo quit, click on the button on the Remote Control Window Click on the Remote Control window’s buttonsClick on the Remote Control buttonConverting files created with Microsoft PowerPoint How to use the Jpeg Conversion ToolLaunching the Jpeg Conversion Tool Converting an image fileHow to use the Projector Configuration Tool How to use the Jpeg Conversion ToolMaking a presentation with converted Jpeg files Conversion Method field, select Creating screen captureSelect items from the menu on the left About lampDetails on major items Lamp replacement Lens cleaning Lens and main unit cleaningMain unit cleaning Trouble indicationsBefore calling service personnel List of general specifications SpecificationsList of supported signals RGB signals SpecificationList of supported signals Y/PB/PR signals SpecificationsList of supported signals Video, S-Video signals
Related manuals
Manual 46 pages 22.46 Kb
Top Page Image Contents