Toshiba TDP-TW90 owner manual Using the Wireless Utility

Using the Wireless Utility (Continued)

■ Displaying a JPEG image saved on a computer via the projector	5 Select the projector to be
1 Launch the Wireless Utility software application.	transmitted.
The Screen Image transmission mode window appears on the computer’s screen.	The IDs of projectors accessible for
	communication will be listed. (If projector name
2 Click on the File icon .	has been set up already, it is shown instead of
	the MAC address.) Select the checkbox of the
The Wireless Utility
	projector to be transmitted to from this list.
window changes to File	Then icon is displayed on the projector’s
transmission mode.	screen for few seconds.
	It is possible to select up-to four projectors.
	6 Click on the	button.

The selected file’s image is displayed by the projector.

3Click on the Browse button, and

select the file to send.

Clicking on the Browse button displays the Open dialog box. Select the file to send, then click on the Open button.

The selected file is added to the pull-down list in the Wireless Utility’s Transmission File field.

4Select the file to be sent from the pull-down list of the Transmission

File field.

Click on the Transmission File field’s button to display the pull-down list. Select the file to be sent from this list.

A thumbnail of the selected file appears in the Preview box. The file displayed here will be transmitted.

Step 3 can be skipped.

The way that drag and drop the file to be sent from the desktop or Windows Explorer into the Preview box is also available. In this case as well, the selected file is added to the file pull-down list Transmission File field’s.

Note

• Only one file can be sent at a time. To send another file, repeat steps 4 and 6 .

■Operating the projector

This function can be used with any projector input.

Note, however, that this will not function with a memory PC card.

1Launch the Wireless Utility software application.

The Screen Image transmission mode window appears on the computer’s screen.

2Click on the Remote

Control button.

The Remote Control window appears.

As the Wireless Utility window is still displayed, you can operate the projector via the Remote Control window, while using the Wireless Utility’s functions.

While it is possible to use this function merely to operate the projector, closing the Wireless Utility also closes the Remote Control window.

Operations

52 53