Names of each part on the control panel and remote control
Parts on the rear panel
Control panel
(9)(10) (11)
Remote Control
Remote control transmitter
(1) (2)(3)(4)(5)(6) | (7) | (8) |
(8) | (1) |
| |
(7) | (2) |
(6) | (3) |
| (4) |
| (5) |
| (4) |
| (6) |
(14) | (3) |
| |
| (2) |
| (8) |
(13) | (12) |
(20) | (19)(18) |
Name
(1) Infrared remote sensor |
(9)
(10)
(17)(16) | (15) | (14) | (13)(12)(11) |
: Main Function
: Senses commands from the remote control. p.18
Preparations
(7)
(1)
| Name | : Main Function |
(1) | ENTER button | : Accepts the selected mode. |
(2) | MENU button | : Displays menus. p.29 |
(3) | SET UP button | : Sets up image and mode. p.26 |
(4) | ON/STANDBY button | : Turns the power on/off (standby). p.22 |
(5) | ON indicator | : Displays whether power is on or off. p.22 |
(6) | INPUT button | : Selects input. p.24 |
(7) | RETURN button | : Goes back one screen. |
(8) | Selection button | : Menu selections and adjustments,etc. p.30 |
(2) | CONTROL terminal |
(3) | CARD indicator |
(4) | UNMOUNT button |
(5) | RESET switch (inside depression) |
(6) | Eject button |
(7) | PC card slot |
(8) | AUDIO OUT terminal |
(9) | MONITOR terminal |
(10) COMPUTER 2 terminal
(11) Main power switch
(12) AC IN socket
(13) AUDIO IN terminal
(14) COMPUTER 1 terminal
: When operating the projector via a computer, connect this to the controlling computer’s
: Displays PC card’s status. p.21
: Press before removing PC card. p.21
: Press if CARD indicator turns red. p.21
: Press to remove PC card. p.21
: Insert PC cards here. p.21
: Outputs audio signals.
: Connect to a computer display, etc.
: Input RGB signal from a computer or other source, or a component video signal (Y/PB/PR) from video equipment.
: AC power line ON (standby)/OFF.
: Connect the supplied power cord here.
: Input audio signals from a computer or video equipment with a component video signal output terminal.
: Input RGB signal from a computer or other source, or a component video signal (Y/PB/PR) from video equipment.
(9) | LAMP indicator | : Displays lamp mode. p.23 |
(10) | TEMP indicator | : Lights when internal temperature too high. p.65 |
(11) | FAN indicator | : Displays cooling fan mode. p.65 |
(12) | FREEZE button | : Pauses image. p.28 |
(13) | MUTE button | : Cuts off the picture and sound temporarily. p.28 |
(14) Numeric keypad | : Use to set up the wireless LAN. Numbers and charac- | |
|
| ters can be entered. p.37 |
Note
•For the remainder of this manual, buttons are referred to as follows:
Selection buttons ⇒ 
; ENTER button ⇒ 
(15) | : Input S video signals from video equipment. |
(16) AUDIO (L/R) terminal | : Input audio signals from video equipment. |
(17) VIDEO terminal | : Input video signals from video equipment. |
(18) AUDIO (L/R) terminal | : Input audio signals from video equipment. |
(19) USB terminal | : Provided for servicing purposes only. Do not use for |
| any connection. |
(20) Antitheft lock hole | : Attach a safety cable or any other antitheft device. |
Note
•Although this owner’s manual abbreviates component video signals as Y/PB/PR, the product also supports signals from video equipment marked “Y/CB/CR.”
16 | 17 |