Using the Wireless Utility (Continued)
3Select the projector to be operated.
In the Remote Control window, click on the 
button, and select the desired projector from the
How to use the JPEG Conversion Tool
The JPEG Conversion Tool converts JPEG files not supported by the projector, image files in other formats, Microsoft® PowerPoint® files, and the like into JPEG files supported by the projector. The JPEG files converted with this tool can be displayed by sending them
using the wireless LAN PC card p.52 , or saving them on a memory PC card p.42 . |
■Launching the JPEG Conversion Tool
The window shown in the figure to the right appears on the computer screen.
Drag the Image Quality Settings slider to the left or right to set the image quality of the file after conversion. Lower values create smaller files, but lower the image quality. (It is not possible to restore the quality of an image after it has been lowered.)
■Converting an image file
This converts JPEG files using compression formats not supported by the projector, Windows® metafiles (wmf), and bitmapped files (bmp) into JPEG files.
4Click on the Remote Control window’s buttons.
The function of each button and box is as follows:
Power On: | Turns projector power on. | |
Power Off: | Turns projector power off. | |
Input (box) : Click on the | button, and select the desired input from the | |
| list. |
|
Go: | Switches to the input selected in the Input box. | |
Freeze: | The picture is paused. | |
Mute: | Cuts off picture and sound. Click again to restore picture and sound. | |
Adjust sound volume. | ||
5To quit, click on the 
button on the Remote Control
window.
Performing this does not close the Wireless Utility window.
To exit both the Wireless Utility and the Remote Control, click on the 
button on
the Wireless Utility window.
Note
• Remote control's functions can be restricted by setting Remote control p.40 .
■Document camera function
The document camera function is available for the Toshiba LCD data projector
For details, consult your local dealer.
(1)In the Conversion Method field, select Converting image file. (Status on launch)
(2)In the File settings field, click on the Browse button for Original Image File Name.
The Open dialog box appears.
(3)In the Open dialog box:
(a)Specify the location of the file to be converted; and
(b)In the Files of Type field, click on the 
button to select the file format. A list of files of that format appear in the Open dialog box.
(4)In the Open dialog box, select the file to convert, then click on the Open button.
(5)In the JPEG Conversion Tool window, in the File settings field, select Browse for File name after conversion. The Save As dialog box appears.
(6)In the Save As dialog box:
(a)Specify the location in which to save the converted file;
(b)Enter a file name of up to 8 characters in the File Name field; and
(c)Press the Save button.
(7)(a) In the JPEG Conversion Tool, click on the Conversion button.
(b)A confirmation dialog box opens. Click Yes.
The computer converts the file. When it finishes a message appears informing you that a JPEG file has been created.
(1)(1)
(2)(2)
(5)(5)
(4)
Operations
54 | 55 |