Toshiba TLP-X2000, TLP-XC2000 owner manual Select OFF Select OK and press the button

Page 18
The password entry screen is displayed.
2 Enter the password using numeric keys of the remote control.
3 Select [Password setting] in the password registration, setting menu, and press the or button.
or
How to set password (from [On] to [Off])
1 Select [Password] in the Default setting 2 menu and press the
button.

Using handy features (Continued)

How to set password (from [Off] to [On])

1Select [Password] in the Default setting 2 menu and press theor

button.

2Select [Password setting] in the password registration, setting menu, and press the or button.

3Select [On].

4Select [OK] and press the button.

The password entry screen is displayed.

5Enter the password using numeric keys of the remote control.

6The password setting will be set as [On].

How to operate when password is [On]

1Turn on the power.

2The lamp lights and the password entry screen appears.

3Enter the password using numeric keys of the remote control.

If the entered password is correct, the start-up screen appears and the projector goes into normal operation. If the password is wrong, a message appears to prompt you to re-enter the password, and again the password entry screen is displayed. If you enter a wrong password for more than 5 times, the projector will automatically power off and enter standby mode.

Note

4Select [OFF].

5Select [OK] and press the button.

Note

•While the password setting is [On], the password entry screen will be displayed only when the power is turned on next time.

Operations

•Even if you have forgot the password setting, the password setting can be forcibly set to [On], by detaching the control panel from the projector first when the power is turned back on after the power cord has been unplugged.

If you can not change the previous password, please input [0000] (4 zeros) using numeric keys of the remote control.

34

35

Page 17 Page 19
Image 18
Page 17 Page 19
Contents TLP-X2000 Safety Precautions USA onlyImportant Safety Instructions Important Safety Instructions Place and Manner of Installation Power Supply Cord SelectionImportant Precautions Save Original Packing MaterialsRemote Control Batteries Exemption ClausesOther Cautions and Informations Contents Checking the package contents Names of each part on the main unitRemote Control TLP-XC2000 Remote Control TLP-X2000Remote control Control panelNames of the terminals on the rear panel CameraOperating the remote control Preparing and using the remote controlLoading dry-cell batteries into the remote control Connecting a computerConnection PlacementPlacement Styles Before connectionTurning the power on and off Label locationsConnection Turning the power on and off Basic operationsUsing handy features Basic operationResizing image Using handy featuresChanging picture mode Cutting off the picture and sound temporarily MuteSetting the password Changing screen sizeFreezing the image Freeze Select OFF Select OK and press the button Using the menus How to use the menusImage adjustment menu Using the menus Display setting menuDetailed description Screen size Reset logo Blackboard modePrecaution Up/down shiftDefault setting menu Default setting 1 menuDefault setting 2 menu Preparation of the document camera Using the document cameraDisplaying Information Status display Key lockUsing the document camera Image projection with the document cameraLocking the white balance When the lamp is brokenAbout lamp Press W.BALANCE button and lock the white BalanceLamp replacement Air filter cleaning Lens and main unit cleaningBefore calling service personnel Trouble indicationsList of supported signals RGB signals SpecificationsList of general specifications SpecificationList of supported signals Video, S-Video signals SpecificationsList of supported signals Y/PB/PR signals Separately sold product
Top Page Image Contents